EL1
EL2
A
ø x
ø y
Fix
Udskydningshastighed/dæmpning Push-out speed
Tilslutningsdel cylinder Connecting part cylinder
Model Model
Gevind stempelstang Thread piston rod
Hovedmodel KX - Fastlåst blokering i indskubnings- og udskydningsretning Main type KX - Rigid locking in push and pull direction
Sådan sammensættes bestillingsnummeret | Order example
K0 B1KX – 3200
699
001*
550N
Låsekraft udskyningsret- ning Locking force in pull direction
Indbygningslængde (EL1)** (se side 11) Extended length (EL)** (see page 11)
Slag- længde Stroke
Låsekraft i indskub- nings- retning Locking force in push direction
Størrelse Size
Kraft Force
Tilslutnings- dele cylinder Connecting parts cylinder
Gevind stempelstang Thread piston rod
Hastighed Push-out speed
Indeksnr.* Index No.*
Model
Udløs- ningsvej Release travel < 1mm
Udløs- ningsvej Release travel > 2,5mm
Øx/Øy mm mm
Min. EL2 (mm)
N
KX – = Normal Normal 0 = Hurtig Fast 7 = Langsom Slow
K0 = MF 10x1x18 O0 = MF 14x1,5x20
Se side 48 ”Tilslutnings dele” See page 48 ”Connecting parts”
* Ved hjælp af dette indeks- nummer (kun nødvendigt ved efterbestilling) kan vi produ- cere nøjagtig de samme gasfjedre som tidlige- re leveret. Indekskoden oplyses på ordrebekræf- telsen /fakturaen. * With the index no. – only necessary for repeating orders – we can reproduce exactly the same gas spring which has already been produced. You will receive the index no. with the order confir- mation / invoice.
Uden tryk No pressure eller (or) 50 N - 1.300 N
2 = 10/22 20 - 250 Slaglængde Stroke x 3 + 83
N/A 7.000
7.000
N = Rustfri stål Stainless steel Udskydningshastigheden fremgår ikke af artikelnummeret i tilbud / ordrebekræftelser pga. tekniske årsager. For quotations / order confirmations, the exten- sion speed is not shown in the article no. due to computer reasons.
Uden tryk No pressure eller (or) 50 N - 1.300 N
3 = 10/28 20 - 250 Slaglængde Stroke x 3 + 87
N/A 10.000 10.000
Uden tryk No pressure eller (or) 150 N - 2.600 N
B = 14/40 30 - 250 Slaglængde Stroke x 3 + 111
N/A 12.000 12.000
***Bemærk: nedsat blokeringskraft | Attention: reduced locking force
Funktion Her kombineres K- og P-typernes fordele. I begge retninger forbliver fastlåsningen fast indtil mekanisk styrke, og på grund af gaskam- merets separate placering, er en trækkraft ikke absolut nødvendig. Blokerbare gasfjedre af KX-typen kan derfor fremstilles trykløse og alligevel med fastlåst blokering i begge retninger. (På grund af størrelsen kan der være en afvigelse på 2 mm. Hvis dette ikke må forekomme, bør du bestille en justerbar KX-model.) Anbefalet temperatur -20°C til +30°C, andre på forespørgsel.
Function Here the advantages of the K and the P type lockable gas springs are combined in one spring. The locking force in both directions is rigid up to the mechanical strength of the spring and because the gas chamber is located separately, an extension force isn’t absolutely necessary. KX type lockable gas spring can there be manufactured without force but they are still rigid in both directions. (Due to the size, there may be a slip of 2 mm. If this is not allowed, you have to order an adjustable KX-model.) Recommended temperature range: -20°C to +30°C, others on request.
21 Bansbach easylift
Med forbehold for tekniske ændringer • We reserve the right to make technical changes at any time without prior notice
Made with FlippingBook - Share PDF online