Setting the Standard in Oil-Water Separation

This interactive Guide provides you with all of the details to understand the basics of Oil-Water Separatoration of compressor condensate.

SETTING THE STANDARD IN OIL-WATER SEPARATION

Condensate Management for Compressed Air Systems

SETTING THE STANDARD IN OIL-WATER SEPARATION

Clean Resources proprietary media

outperforms all other systems, establishing us as the leader within the compressor condensate oil-water separation industry. We back it up with 10 ppm or less for the life of the Unit, and EPA compliance — Guaranteed!

1540 Louis Bork Drive, Batavia, IL 60510 | 800-566-0402 | cleanresources.com

SETTING THE STANDARD IN OIL-WATER SEPARATION

In This Packet:

Setting the Standard Clean Resources Products and Specs Clean Resources has a condensate management solution for any compressed air system size. Why Clean Resources? Why you should choose Clean Resources for your condensate management solution. Condensate Management Options Chart Why Clean Resources Active Filtration is the clear oil-water separation winner. Compressed Air Compressed Air Basics All compressed air systems and components produce condensate, which must be treated. Oil-Water Separator Basics What an oil-water separator is, who needs one, and why they’re necessary. Condensate Management Clean Resources proprietary media guarantees lubricant removal to 10 ppm or less. Made in the USA Our products comply with the Build America, Buy America Act. Regulations With a Clean Resources Oil-Water Separator, EPA Compliance is guaranteed! Safety Our products resist mold growth, eliminate messy media changeouts, and mitigate slip-and-fall danger . Sustainability Our Oil-Water Separators reduce the environmental impact of oil and chemical-laced condensate. Recycling Clean Resources is the only product on the market to offer an environmentally friendly end-of-life solution. Contact Us

1540 Louis Bork Drive, Batavia, IL 60510 | 800-566-0402 | cleanresources.com

SETTING THE STANDARD IN OIL-WATER SEPARATION

SMART-PAK SERIES

CRP SERIES

THE NEXT GENERATION MOLECULAR FILTRATION SYSTEM • Compression-fit manifold for precise filtration control • Timer drain for improved flow of condensate through the media bed • Antimicrobial sanitation of discharge hose to prevent algae growth • Twelve available inlets (increased from six) • Efficiently & effectively removes all oils, including glycol-based lubricants • No maintenance or messy bag change-outs • Cradle-to-grave warranty • No exposure to mold, bacteria or e-coli

Life Span* (Months /Hours † )

Unit

IDC 350 CRP 500 CRP 750 CRP 1000 CRP 1500 CRP 2000

12/8,000 12/8,000 12/8,000 12/8,000 12/8,000

12/8,000 *Months or Hours whichever occurs first † See complete lifespan chart on page 2.

SUPER-PAK SERIES

The Super-Pak by Clean Resources offers large compressed air systems a strong, reliable oil-water separator. Standard systems are designed for 4,000 – 10,000 CFM applications.

SUPER (CFM)

Life Span (Hours † )

4,000 5,000 6,000 7,000 8,000 9,000

19,000 16,000 13,000 11,000 10,000

FOR LARGE COMPRESSED AIR SYSTEMS Small footprint for large HP systems shipping on a super duty 48” x 48” pallet • Ships from the factory pre-plumbed, primed, and leak tested • Three layers of redundancy • System capacity functions on all compressor lubricants, including glycol lubricants • Custom decompression chamber/pump system • No messy bag change-outs • No exposure to mold, bacteria or e-coli • System monitoring for timely change-out • 110v Power required

9,000

10,000 8,000 † Numbers above are for the SUPER-PAK 4. See complete lifespan chart on page 2.

MICRO SERIES

DESIGNED FOR SMALLER COMPRESSED AIR SYSTEMS This system is designed as an economical solution for small compressed air systems up to 125 psi (up to 175 psi with inline regulator installed). The MICRO line also includes a factory-installed and plumbed wall bracket, reducing installation time. Replacement cartridges provide straightforward, no mess maintenance and offer the lowest life cycle cost in the industry.

MICRO (CFM)

Life Span* (Months /Hours † )

12/2,000

100 8/2,000 *Months or Hours whichever occurs first † See complete lifespan chart on page 2.

SETTING THE STANDARD IN OIL-WATER SEPARATION

GUARANTEED PERFORMANCE Clean Resources guarantees properly sized and installed products will reduce the contaminants in your compressor condensate to 10 ppm or less for the life of the unit. If your unit fails while operating in approved conditions and has been properly sized and installed, we will replace the failed unit on a pro-rated schedule.

Width (in)

Depth (in)

Height (in)

Weight (lbs)

Width (in)

Depth (in)

Height (in)

Weight (lbs)

Unit

SUPER-PAK 1 32 SUPER-PAK 2 40 SUPER-PAK 3 48 SUPER-PAK 4 48 MICRO 50 12 MICRO 100 17

52 48 48 48

750

IDC 350 CRP 500 CRP 750

12 14.5

23 48 48 48 57 57

45 1,500 45 2,250 45 3,000

16 16

15 15 15 20 20

110 125 150 310 370

CRP 1000 16 CRP 1500 22 CRP 2000 22

5 5

19 19

3 6

MICRO Series

CRP Series

SUPER Series

100 IDC 350 500

750

1000 1500 2000

Capacity

1 pt/min

1 qt/min

1 GPM

2 GPM

3 GPM

5 GPM

HP ACFM

Unit Life in Hours*

20 30 40 75

5,000 10,000

7.5

3,000 3,000 1,000

7,000 5,000

10 15 20 25 30 40 50 60 75

3,000 32,000 2,000 24,000 2,000 19,000

100 125 150 200 250 300 375 500 600 750

16,000 32,000

13,000 24,000 32,000

10,000 19,000 25,000 32,000 9,000 16,000 21,000 26,000 7,000 13,000 17,000 21,000 5,000 10,000 13,000 16,000

100 125 150

4,000

8,000 11,000 13,000 30,000

6,000 5,000 4,000

8,000 11,000 24,000 30,000 30,000

200 1000 250 1250 300 1600 350 1900 400 2200 450 2350 500 2500 600 3000 800 4000 1000 5000 1200 6000 1400 7000 1600 8000 1800 9000 2000 10000

6,000 5,000 4,000

8,000 18,000 22,000 22,000 33,000 6,000 15,000 18,000 18,000 27,000

5,000 11,000 14,000 14,000 21,000 35,000 4,000 10,000 12,000 12,000 18,000 29,000

4,000

8,000 10,000 10,000 15,000 25,000

8,000 7,000 6,000 5,000 4,000 3,000 3,000 2,000 2,000 2,000

9,000 9,000 7,000 6,000 4,000 4,000 3,000 3,000 2,000 2,000

9,000 14,000 24,000 33,000 9,000 13,000 22,000 31,000 7,000 11,000 18,000 26,000

6,000 4,000 4,000

8,000 14,000 19,000 7,000 11,000 16,000

6,000 5,000 4,000 4,000

9,000 13,000 8,000 11,000 7,000 10,000 6,000 9,000 6,000 8,000

CORRECTION FACTORS ROTARY SCREW COMPRESSORS (2 ppm carryover) Unit Life: [hours from above] x [CF from below] Example: IDC 350 at 40 hp running 6,000 hrs/yr Unit Life: 13,000 x 1.33 = 17,290 hours †

* Unit life numbers in this chart assume rotary screw compressors with 2 ppm oil carryover running 8,000 hrs/ yr. Unit life may vary due to differences in air compressor oil consumption rates, age, and maintenance of compressor. For use with reciprocating compressors, consult factory to calculate unit life.

RECIPROCATING COMPRESSORS (8 ppm carryover) Unit Life: [hours from above] x 0.25 x [CF from below] Example: IDC 350 at 20 hp running 4,000 hrs/yr Unit Life: 24,000 x 0.25 x 2 = 12,000 hours †

Hrs/yr runtime

8,000 6,000 4,000 2,000

SMART GREEN — End-of-Life Solutions

Life Correction Factor (CF)

1 1.33 2

† To calculate unit life in months: [Unit Life] / 8,000 * 12

We’re committed to reducing our carbon footprint and want to make it easy for you to do the same. Our Smart Green recycling program offers free end-of-life recycling for registered units, in hopes to prevent them from ending up in landfills like many competitive oil-water separators. Clean Resources will even cover the cost of the recycle processing fees for end users that use our Green End-of-Life Solution. You can learn more at recycleoilsep.com.

Clean Resources | 1540 Louis Bork Drive, Batavia, IL 60510 | 800-566-0402 | cleanresources.com | sales@cleanresources.com

SETTING THE STANDARD IN OIL-WATER SEPARATION WHY CLEAN RESOURCES?

1 Do you have an air compressor? Then you need a Clean Resources Oil-Water Separator because you are out of Federal, State, and local regulations in all 50 states.

2 Will your system work with our lubricant type? Yes, Clean Resources separators are compatible with all manufacturers.

3 I have an OWS on my current system. Simply put, it doesn’t work. Clean Resources makes the only system that exceeds all standards for the entire life of the product, not just at start-up. 4 W e collect our condensate and have it hauled away with our other waste. Well, you are having your money hauled away, too. By installing a Clean Resources system, you will be saving about 90% of the cost.* 5 W e have our in-house treatment system process the condensate. A Clean Resources system is still a much more economical solution. Oil is very taxing on treatment systems. 6 How many compressors do you have and what HP? • Compressor 1:______ HP • Compressor 2:______ HP • Compressor 3:______ HP • Compressor 4:______ HP

• Compressor 5:______ HP • Compressor 6:______ HP

* According to Plant Engineering, transportation, storage, and disposal costs can exceed $500 per 55-gallon drum of condensate.

1540 Louis Bork Drive, Batavia, IL 60510 | 800-566-0402 | cleanresources.com

SETTING THE STANDARD IN OIL-WATER SEPARATION

COMPANY A: Passive Filtration

COMPANY B: Liquid-Phase Separation Relies on the buoyancy of oil to separate from water so it can be skimmed off and treated. Inefficient and requires a large footprint.

COMPANY C: Active Filtration

Clean Resources Active Filtration Chemically adsorbs lubricants down to 10 ppm or less within a single long-lasting, maintenance-free unit.

Four condensate management options, One Clear Choice.

Lets condensate flow through media bags or cartridges to passively absorb lubricants. Inefficient and requires messy media change-outs.

Actively removes oil from the condensate before sending it through a polishing filter. Requires a prefilter.

Features Removes bulk oil

✔ ✔

Traps lubricants within media Services a wide compressed air system horsepower range

✔

✔ ✔

Small footprint

Contained within a single unit

Resists accidental oily discharge due to vibrations or temperature changes

✔

Maintenance free

Actively attracts and bonds with lubricants Removes Polyglycols and dissolved hydrocarbons

✔

Free Recycling

Lifespan of 8,000 hours (when properly sized to the system) Reduces lubricants to 10 ppm or less

✔

GUARANTEED!

EPA Compliance

Oil-Water Separators for Every System Size

MICRO Series (Simple solution for very small systems: 5–25 HP) IDC-350 (Economical solution for small systems: 15–125 HP) CRP Series (Technologically advanced solution for multi-unit systems: 30–600 HP) SUPER-PAK Series (Powerful separation for large and challenging installations: 150–2,000 HP+)

1540 Louis Bork Drive, Batavia, IL 60510 | 800-566-0402 | cleanresources.com

SETTING THE STANDARD IN OIL-WATER SEPARATION

COMPRESSED AIR BASICS

DID YOU KNOW ...

1 What is an Industrial Compressed Air System? An Industrial Compressed Air System is simply an air compressor. Most industrial systems typically include other downstream components, such as air dryers, air storage tanks, and a series of filters, all of which can create and pass through oil and chemical-laced condensate.

A compressor can produce up to 1,000 gallons of oily condensate per day. ?

Air intake

Rotary screw compressor with aftercooler

Moisture separator

Wet receiver tank

Coalescing pre-filter

Refrigerated dryer

Coalescing post-filter

Optional activated carbon filter

Dry receiver tank

System flow controller

Condensate line

2 Condensate — What is it? Condensate is the polluted water by-product of an air compressor that contains harmful oil and chemical elements. The EPA classifies compressor condensate as ‘Used oil containing PCBs.’ This condensate MUST be collected and cannot be allowed into the environment or put into public sewer systems without being treated.

One gallon of lubricant can contaminate up to 4 Acres of groundwater!

4 A dvantages of a Clean Resources Oil-Water Separator

3 Why is an Oil-Water Separator Needed?

The EPA and Clean Water Act mandate condensate discharge to be 50 parts per million (ppm) or less. The average compressor condensate contains a minimum of 300 ppm of oil. All Compressed Air Systems MUST have an oil-water separator.

> Compliance Guaranteed • Exceeds all standards for the product’s entire life, not just at start-up. • Works with ALL lubricant types, including polyglycol, silicone, and synthetic oils. • Only system that guarantees EPA Compliance for the life of the unit.

> Maintenance Free • Simple to install • Requires near-zero maintenance

> Cost Effective • Treat condensate onsite • Save 90% of the cost of hauling away condensate for treatment

1540 Louis Bork Drive, Batavia, IL 60510 | 800-566-0402 | cleanresources.com

SETTING THE STANDARD IN OIL-WATER SEPARATION COMPRESSED AIR BASICS

1 Do you use an air compressor or compressed air system?

You need an Oil-Water Separator

You do not need an Oil-Water Separator

STOP

2 Do you already use an Oil-Water Separator?

For shame! Oil-Water Separators are required to comply with government regulations and protect the environment and drinking water supply. Consult the list below for the best Oil- Water Separator for your system.

3 Is it a Clean Resources Oil-Water Separator?

Y N

Nice try! It’s great that you care about the environment, but competitive products don’t have the same reliability and lubricant-removal power as Clean Resources products. Consult the list below to find out what Oil- Water Separator you should be using for your system.

Well done! You’re using the best oil- removal product on the market. Check the list below to make sure you are using the optimal unit for your system size.

Oil-Water Separators for Every System Size

1540 Louis Bork Drive, Batavia, IL 60510 | 800-566-0402 | cleanresources.com

SETTING THE STANDARD IN OIL-WATER SEPARATION OIL-WATER SEPARATOR BASICS

WHAT

WHY

is an Oil-Water Separator?

are Oil-Water Separators important?

All compressed air systems produce condensate as a normal part of their operation. This condensate contains oil and other contaminants and must be treated before it can be released into the environment or put into public drains. Oil-Water Separators remove these contaminants, making the condensate suitable for discharge.

Compressor condensate contains harmful oil and chemical elements that pose a significant threat to natural waterways and drinking water sources. It must not be released into the environment or public sewer systems without adequate processing. Federal, State, and local agencies, including the EPA, strictly regulate compressor condensate, requiring proper collection and treatment before disposal.

A 100 HP Compressor may produce up to 1,000 gallons of oily condensate per day in humid conditions.

DID YOU KNOW...

A single gallon of lubricant can contaminate four acres of ground water.

WHO

HOW

needs an Oil-Water Separator?

can a Clean Resources Oil-Water Separator help?

Industrial compressed air systems can be composed of air compressors, filters, dryers, and air receivers, all of which produce contaminated effluent that needs to be treated. Compressed air is used everywhere, and every one of these systems needs an Oil-Water Separator.

• Simple to install with near-zero maintenance required. • Resists mold buildup that can clog other systems. • Exceeds all removal standards for the life of the product. • Guarantees EPA Compliance for the life of the product. • Works with all lubricants including synthetics and polyglycols. • Save 90% of the cost of hauling away oily waste for processing.*

Compressed air is often called the fourth utility because it’s a vital energy source for many industries, similar to electricity, water, and gas.

Regulatory limits can be as low as 10 ppm, a standard only Clean Resources Oil-Water Separators can achieve.

DID YOU KNOW...

Treat condensate from every discharge point with a single Clean Resources unit

Air intake

Rotary screw compressor with aftercooler

Moisture separator

Wet receiver tank

Coalescing pre-filter

Refrigerated dryer

Coalescing post-filter

Optional activated carbon filter

Dry receiver tank

System flow controller

Condensate line

* According to Plant Engineering, transportation, storage, and disposal costs can exceed $500 per 55-gallon drum of condensate.

SETTING THE STANDARD IN OIL-WATER SEPARATION CONDENSATE MANAGEMENT

DID YOU KNOW ...

1 All Compressors Create Condensate It’s messy, loaded with contaminants, and a health hazard. What can be done about it?

Approximately 80 to 85 percent of all U.S. companies using compressed air are out of EPA compliance and may not realize it. 85%

2 The Clean Resources Solution Clean Resources engineered proprietary products are the single most efficient Oil-Water Separators on the market. Our products have • treated compressed air systems from 10–10,000 HP and more, • prevented millions of acres of contamination, • made over 100,000 compressor rooms EPA-compliant, and • saved customers millions in fines.

3 How It Works Our proprietary alumina silicate substrate media bed permanently bonds with lubricants while repelling the water for clean, easy disposal. The bonded waste is non-toxic and can be disposed of as non-hazardous special waste or recycled FREE through Clean Resources.

All Clean Resources Oil-Water Separators are guaranteed to reduce lubricants to 10 ppm or less. EPA Compliance is guaranteed!

4 Treat Your Entire Compressed Air Line With One Unit Run a condensate line from any compressors and connected equipment to a Clean Resources Oil-Water Separator for quick, easy, cost-effective treatment.

Air intake

Rotary screw compressor with aftercooler

Moisture separator

Wet receiver tank

Coalescing pre-filter

Refrigerated dryer

Coalescing post-filter

Optional activated carbon filter

Dry receiver tank

System flow controller

Condensate line

1540 Louis Bork Drive, Batavia, IL 60510 | 800-566-0402 | cleanresources.com

MADE IN THE USA CONDENSATE MANAGEMENT SERVICES

DID YOU KNOW ...

1 The Situation Approximately 80 to 85 percent of all U.S. companies using compressed air are out of EPA compliance and may not realize it. That’s nearly 1.5M air compressors unlawfully contaminating millions of gallons of groundwater daily.

The problem is local. The solution can be, too.

A 100 HP compressor can produce 2 gallons of condensate per hour. At 2 ppm oil carryover, this compressor would expel more than 5 gallons of oil per year!

2 The Build America, Buy America Solution Clean Resources only uses domestically sourced materials and production. Our media and components are products of the USA and comply with the Build America, Buy America Act.*

Clean Resources engineered proprietary products are the single most efficient Oil-Water Separators on the market. Our products have • prevented millions of acres of contamination, • made over 100,000 compressor rooms EPA-compliant, and • saved customers millions in fines.

A 1,000 cfm compressor with a refrigerated dryer can produce over 57,000 gallons of condensate per year! That’s enough to fill 11,400 pails!

* The Build America, Buy America Act, enacted as part of the Infrastructure Investment and Jobs Act on November 15, 2021, established a domestic content procurement preference that requires that all iron, steel, manufactured products, and construction materials used in covered infrastructure projects are produced in the United States.

3 Clean Resources Is a Made in the USA Products and Services Provider

> Clean Resources History Clean Resources roots started in a small garage in Bartlett, IL, over 25 years ago. Today, we are the pre-eminent environmental leader in Oil-Water Separators for the compressed air industry.

> Recyclable Units All registered units qualify for the Clean Resources free recycling program. When saturated with oil, our media can be repurposed for energy using the oily waste as fuel. All recycling takes place within the United States.

> Our 100% Guarantee 10 ppm* or less oil carryover for the unit’s life, and we guarantee U.S. EPA compliance. No other company makes this guarantee!

*Methods tested: EPA1664b, EPA8270, EPA624 & EPA625 EPA8015c

1540 Louis Bork Drive, Batavia, IL 60510 | 800-566-0402 | cleanresources.com

TOPIC EPA COMPLIANCE IS GUARANTEED! REGULATIONS

DID YOU KNOW ...

1 The Situation • 80 to 85 percent of all U.S. companies using compressed air are out of EPA compliance. • Many companies are unaware of this problem. • More than a million gallons of oil are illegally leaked into the ground and storm drains daily, contaminating millions of gallons of groundwater .

One gallon of lubricant can contaminate up to 4 Acres of groundwater!

2 Typical Concentration vs Discharge Limit

10x

Typical Concentrations • Many new compressors tend to have 1 – 2 ppm oil carryover.

EPA Discharge Limit • The Federal EPA limit is 50 ppm. • Each state and local municipality can determine its own allowable discharge limit. • The typical limit for states with coastal waters, lakes, and large rivers is 15 ppm or less.

Most lubricants are not visible in water unless concentrations are greater than 500 ppm. That’s more than 10 times the typical regulatory limit!

• Be careful! That’s the oil-to-air ratio. • When compressed into liquid condensate, that 1 – 2 ppm becomes 300 ppm or more .

3 Penalties for Violating EPA Regulations

Chicago, Los Angeles, and New Orleans all have a maximum 15 ppm oil carryover in condensate discharge water. 15 ppm

Negligent Violations: First conviction: 1 year in jail and/or $2,500 – $25,000 per day Subsequent convictions: 2 years in jail and/or $50,000 per day

Knowing Violations: First conviction: 3 years in jail and/or $5,000 – $50,000 per day Subsequent convictions: 6 years in jail and/or $100,000 per day

* According to the EPA’s website, under the Clean Water Act and Title 40 of the Code of Federal Regulations

4 Put Your Trust in Clean Resources

> Our 100% Guarantee Our proprietary media outperforms all other systems on the market. We guarantee 10 ppm* or less oil carryover for the unit’s life, and we guarantee EPA compliance. No other company makes this guarantee! *Methods tested: EPA1664b, EPA8270, EPA624 & EPA625 EPA8015c

1540 Louis Bork Drive, Batavia, IL 60510 | 800-566-0402 | cleanresources.com

TOPIC MAINTAIN A SAFE WORKING ENVIRONMENT SAFETY

DID YOU KNOW ...

1 The Situation Some competitor oil-water separators (OWS) require frequent media bag changeouts to maintain efficiency. These separators tend to spill oil on the ground or floor, creating a safety issue. • Bag changes are messy, resulting in slick floors, slip-and-fall danger, and potential lawsuits. • Algae and mold can form, risking the health and safety of your technicians. In a slip-and-fall situation, OSHA may be called in to investigate. If oil from a bag-style OWS spills oil on the ground or into a drain, they may notify the EPA, which could result in hefty fines.

Clean Resources proprietary media bonds with lubricants, ensuring no oil will be released into your workplace or the environment over time.

2 The Clean Resources Solution Clean Resources Oil-Water Separators are engineered to resist or eliminate problems that can lead to OSHA or EPA involvement. • The bag-free, disposable design eliminates the need for messy media changeouts. Simply swap out the spent drum for a new one. • Our antimicrobial media resists algae and mold buildup, making day-to-day operation safer for everyone. • Free recycling makes disposing of the old media safe and easy.

Dangerous black mold can form in your system, resulting in illness, downtime, and worker’s comp claims. Clean Resources proprietary media resists mold and algae formation.

3 Safety and Security the Clean Resources Way

> Our 100% Guarantee Our proprietary media outperforms all other systems on the market. We guarantee 10 ppm* or less oil carryover for the unit’s life, and we guarantee U.S. EPA compliance.

> Easy Installation and Changeout • Prime the unit and run condensate lines directly into the unit • Saves time and mess for service • When the end-of-life is reached, replace with a new unit

> Maintenance Free • Never open the sealed unit • No pumps, sensors, or pre-separation filter pads • Not susceptible to mold • No messy filter/bags/elements to change (zero cost)

*Methods tested: EPA1664b, EPA8270, EPA624 & EPA625 EPA8015c

1540 Louis Bork Drive, Batavia, IL 60510 | 800-566-0402 | cleanresources.com

REDUCING OIL’S IMPACT ON THE ENVIRONMENT SUSTAINABILITY

DID YOU KNOW ...

One gallon of lubricant can contaminate up to 4 Acres of groundwater!

2 The Clean Resources Solution Clean Resources engineered proprietary products are the single most efficient Oil-Water Separators on the market. Our products have • prevented millions of acres of contamination, • made over 100,000 compressor rooms EPA-compliant, and • saved customers millions in fines.

Clean Resources proprietary media bonds with lubricants, ensuring no oil will be released into the environment over time.

3 Why You Should Trust in Clean Resources

> Our Goal Is Two-fold • Reduce the environmental impact of oil and chemical-laced condensate on our inland, coastal and groundwater supply, and • Turn the estimated 1.5 million non-compliant air compressors EPA-compliant. > How it Works As the condensate from the waste stream drains into the unit, it comes into contact with our proprietary alumina silicate substrate media bed. These beds adsorb the lubricant, permanently bonding with the media while repelling the water for clean, easy disposal.

> Our Impact Our commitment to global sustainability allows the production of environmentally responsible products that respect our natural resources, decrease landfill usage, and provide clean water supplies for generations to come.

> Our Units Are Recyclable Our media is engineered so that, when saturated with oil, it can be repurposed for energy using the oily waste as fuel. All registered units qualify for the Clean Resources FREE recycling program.

1540 Louis Bork Drive, Batavia, IL 60510 | 800-566-0402 | cleanresources.com

TOPIC MINIMIZE YOUR ENVIRONMENTAL FOOTPRINT RECYCLING

DID YOU KNOW ...

1 The Situation When properly sized, a Clean Resources Oil-Water Separator running 8,000 hours per year is guaranteed EPA compliant for 12 months . When the unit has reached its end-of-life, how do you safely and environmentally dispose of it?

2 Free Recycling Program There are two options to dispose of a spent unit: 1. Smart Green™ Initiative The only product on the market to offer an environmentally friendly end-of-life solution. • Go to recycleoilsep.com and create an RMA • Ship the unit to Clean Resources for free recycling Spent units are shipped as non-hazardous special waste. The containers and components are recycled and repurposed, reducing the global footprint.

All Clean Resources Oil-Water Separators are guaranteed to reduce lubricants to 10 ppm or less. EPA Compliance is guaranteed!

2. Dispose Locally Dispose of at your local waste management facility or landfill as non-hazardous waste. • The media is engineered to permanently bond all lubricants, ensuring no release of material into the environment over time.

Clean Resources Oil-Water Separators work with all compressor fluids, including Polyglycol and Silicone.

3 Why Else Should You Use Clean Resources Oil-Water Separators?

> Unique Sizes • External/Internal decompression chamber • No “upsizing” required • Small footprint • Unmatched gallons-per-minute performance > Maintenance Free • Never open the unit • No pumps, sensors, or pre-separation filter pads • Not susceptible to mold • No messy filter/bags/elements to change (zero cost)

> Easy Installation and Changeout • Prime unit and run condensate lines directly into the unit • Saves time and mess for service • When end of life is reached, replace with a new unit

> Works with All Compressor Fluids • Manages all compressor fluids including POLYGLYCOL and SILICONE • Alumina silicate substrate media bed bonds to lubricant • Specific gravity, emulsification, relative humidity, and temperature do not affect performance

1540 Louis Bork Drive, Batavia, IL 60510 | 800-566-0402 | cleanresources.com

SETTING THE STANDARD IN OIL-WATER SEPARATION

Ready to order? Have questions? Our sales team is ready to help!

800-566-0402 | sales@cleanresources.com

1540 Louis Bork Drive, Batavia, IL 60510 | 800-566-0402 | cleanresources.com

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17

cleanresources.com

Made with FlippingBook - Share PDF online