ColMAP TM SLALOM 7
The ColMAP TM Slalom 7 is a linear automatic sealing machine working with a tool plate indexing system. It is manufactured and designed to accommodate a range of paperboard Modified Atmosphere Packaging (M.A.P.) products, including sandwich packs, salad boxes, and film lidded trays. Packs are placed by hand into tooling pocket plates. The machine then indexes through the vacuum and gas chamber following the desired M.A.P. programme.
The chassis of the machine is extruded anodized aluminium and it is assembled on 6 x adjustable levelling feet and 6 x castors for mobility. Interlock safety panels, covers and control boxes are in stainless steel S304. All panels are easily removable for maintenance or clean down of machine.
Features and benefits
• Selection of up to 10 programmes to vary amounts of vacuum and gas fill to achieve the desired residual oxygen content • Electronic systems are positioned in stainless steel panel for easy inspection and maintenance • External 106 m 3 vacuum pump • Vacuum can be controlled by time or by sensor • Gas inlet for premixed gas (customer supply) • Regulator of pressure and sensor of gas supply is fitted and an audible alarm for lack of gas or low gas sounds • Ejection / exit at 90 0 C to infeed and gravity drop onto customers accumulation table or conveyor • Optional extras: coders, load stations, interlocks and right and left hand exit • Can be used to seal plastic trays
• Tooling plates index pneumatically within poly guides • Index and tool plates are centralised before seal closure, this system optimises reliability • Vacuum and gas and seal cycle commences with safety control • Indexing through into the seal head area is under a roller to assist in the fold and crease of the pack flange edges before sealing • No need for tools to extract tool plates as these drop into position onto sealing guides which control position and indexing • Teflon coated heated seal plate • Removal and complete change over of tool sets is approximately 15 minutes • Touch screen and push button controls, from a control panel surface mounted at infeed
up to 5 cycles per minute for M.A.P. packs and up to 10 cycles per minute for non-M.A.P. packs
Sealing area capacity
380 x 265mm
3800 x 1360 x 1400mm (machine footprint)
32 Amp x 3 phase x 50/60Hz + N + E (5 pin 16 Amp industrial)
Customer supply compressed air
Included outside of machine
Tel: +44 (0)1525 712 261 • firstname.lastname@example.org • www.colpacpackaging.com
Made with FlippingBook - Online catalogs