6.2.8 SILENCER - Silencers are manufactured from 11 and 14 gauge carbon steel. The silencers are lined with a minimum of 3” of a sound damp ing material.
6.2.9 SMOKE DETECTION – Smoke detectors are available in a variety of models. Smoke detectors should be installed by qualified individuals and in accordance with any local, state, or national codes/regulations/laws (if any). 6.2.10 SPRINKLERS - Unless otherwise requested, the sprinklers discharge at 165 o F. Sprinklers must be connected to the plant’s main sprinkler system and in accordance with any local, state, or national codes/regulations/laws (if any).
6.2.11 FILTERS – •
Fire Retardant 80/20 Cellulose/Polyester Blend
• • • •
Fire Retardant 80/20 Cellulose/Polyester Blend Wide Pleat
Fire Retardant Nanofiber
Spunbond
Other configurations available upon request
7. INSTALLATION
7.1 Initial Considerations
7.1.1 The location of the unit(s) must be planned to maximize effective operation and simultaneously afford access for service/maintenance, while keeping safety considerations at the forefront. Explosions and fires in collection systems are possible; therefore, systems should be designed and placed with those two aspects in mind and in accordance with any local, state, or national fire/safety codes/regulations. Thought should also be given to electrical and compressed air sources, keeping in mind that the collector will need to be connected with electricity, compressed air, and fire detection/suppression systems (optional). Should additional questions arise or assistance is needed consult your Clean Air Industries distributor.
7.1.2 After the installation, access/clearance must be available to service the following
components:
1. Filters 2. Fan 3. Valves 4. Controls 5. Dust drums
7.2 Mechanical
NOTE : All of th e m echanical i nstallation m u st be p erformed b y a qualified in staller an d in ac cordance w ith loc al, state, an d n ational c odes/regulation s/laws ( i f an y). 7.2.1 The ATH series unit is a factory assembled dust/smoke collector. Placement/movement of the unit inside the factory/building is usually the major concern. Ensure you have enough room in front of the access doors and/or dust drawers for easy filter access as well as all around the unit for access in the event of maintenance or emergency.
7.2.2 After placement the collector should be secured to the floor using tapered anchor bolts (optional).
Page 8
sales@clean-air.com
1-866-665-1829
www.clean-air.com
Made with FlippingBook Annual report maker