Tech Line Lathe chucks
Type
Description
ROTA-M flex 2+2
Extremely flexible 4-jaw manual lathe chuck with patented drive concept. Due to the large compensation stroke, round, cubic and geometrically unshaped workpieces can be clamped without any problems.
ROTA-ML flex 2+2
Extremely weight-optimized power lathe chuck with through-hole and up to 40% reduced moment of inertia compared to conventional lathe chucks. Shortened cycle times and energy-efficient machining, especially in the area of high-volume production.
ROTA NCE
ROTA NCF plus 2
Power lathe chuck with through-hole and integrated centrifugal force compensation for reducing the loss of clamping force under speed of rotation. This allows the workpieces to be machined at significantly higher speeds.
ROTA NCF
Power lathe chuck without through-hole with the longest jaw stroke at the highest jaw clamping force. An absolute problem solver for demanding applications.
ROTA NCO
Power lathe chucks without through-hole especially for vertical lathes. Optionally available with centrifugal force compensation or individual jaw adjustment.
ROTA NCO2
2-jaw power lathe chuck without through-hole with long stroke and maximum clamping force at the same time. Ideally suited for workpieces with large interfering contours.
ROTA 2B
ROTA NCR
6-jaw compensation chuck for deformation-sensitive clamping of thin-walled workpieces.
Sealed 6-jaw compensation chuck for deformation-sensitive clamping of thin-walled workpieces. The sealing system ensures constant clamping forces, minimal maintenance costs and an even wider range of applications.
ROTA NCR-A
Power lathe chuck with integrated pneumatic cylinder and very large chuck bore especially for machining large tubes.
ROTA TB2
Power lathe chuck with integrated pneumatic cylinder and very large chuck bore especially for machining large tubes. A rapid stroke and clamping stroke enable collision-free loading of pipes with large interfering contours.
ROTA TB2-LH
30
Made with FlippingBook - Online Brochure Maker