Modular clamping system for direct workpiece clamping Quick-change pallet systems
Module type
Description
Basic modules serve as the basis of the clamping pillars. Depending on the machine table interface, there are different basic modules available.
Basic modules
Stacking modules are used to preset the height of the clamping pillars. The modules are available in five standardized heights.
Stacking modules
Clamping modules serve as an interface to the workpiece in combination with VERO-S clamping pins. They are available in pneumatic or manual versions.
Clamping modules
In combination with compensation bolts, compensation modules can continu- ously compensate for height differences of up to 11 mm. They are available in pneumatic or manual versions.
Compensation modules
Basic modules serve as the basis of the clamping pillars. Depending on the machine table, there are different basic modules available.
Basic modules
Robust module with three VERO-S interfaces for superstructures of heavy work- pieces and fixtures with wide lateral support.
DUO basic modules
Versatile clamping modules with two clamping areas for mounting a VERO-S clamping pin from above and below.
VARIO basic modules
Stacking modules are used to preset the height of the clamping pillars. The modules are available in three standardized heights.
Stacking modules
44
Made with FlippingBook - Online Brochure Maker