Intelligent clamping technology Quick-change pallet system, clamping force blocks
NEW
VERO-S AFS3 IOL The new AFS3 IOL monitoring units provide greater transparency during clamping procedures. The clamping statuses “Module open”, “Module clamped” and “Module clamped without clamping pin” as well as the pallet presence of the SCHUNK premium modules from the VERO-S NSE3 series can be monitored via an IO-Link signal. An LED light indicates the clamping status, ensuring additional operating safety. The AFS3 IOL monitoring units are available as standard for the NSE3 99, NSE3 138, NSE3 176 and NSE3 100-75 modules, which have mounting threads on the circumference as standard. This smart electronic monitoring system interaction ensures greater safety in automated workpiece clamping for users.
NEW
VERO-S NSE3-PH IOL VERO-S NSE3-PH IOL is the most innovative clamping device in the field of electromechanical clamping devices – with unbeatable performance. The piezo-hydraulic drive achieves almost the same pull-down forces with an electromechanical quick-change pallet system as with the fluid-actuated clamping device in the same installation space. The entire control and sensor system is fully integrated in the module so that no additional interfering contours are created. In addition to the innovative drive, both the monitoring of the clamping slide positions and the pallet presence are fully integrated in the module. All data is transferred via an IO-Link interface, allowing the module to be easily integrated into all common fieldbus systems.
NEW
TANDEM KSE3 IOL Electromechanical clamping devices with IO-Link interface now also available for TANDEM clamping force blocks. The SCHUNK KSE3 is the first clamping force block that is electrically controlled and driven by a motor-gearbox combination. Due to the fully inte- grated electronics and actuators, signal processing takes place exclusively in the clamping device. The special feature of the KSE3 clamping force block is that it has jaw pre-positioning and a variable clamping force in the range of 30 – 100%. In addition, the clamping device signals when lubrication is required.
49
Made with FlippingBook - Online Brochure Maker