Amtech ATC Cyclone Dust Collector Series User Manual

1

4. INSTALLATION 4.1 OFF LOADING AND INSPECTION

ATC-Series cyclone units are shipped with major components mounted on skids, size permitting. The blower assembly will be pre-assembled to the upper barrel assembly. The orientation will have the inlet and outlet opposed 180 deg. unless requested otherwise at the time of order. Other skids may contain afterfilter units or other accessory components. As soon as the equipment arrives, it should be carefully inspected to make certain all items on the packing list are present and in good condition. Even though the equipment is mounted on heavy shipping skids at the factory, damage can occur during shipment. Note damage or missing items on the Bill of Lading. The PURCHASER should take immediate steps to file reports and damage claims with the carrier. Damage to a unit in transit is the responsibility of the carrier since it is Clean Air Industries policy to make shipments FOB factory (i.e. ownership passes to the purchaser when the unit is loaded and accepted by the trucking firm). Any claims for transit damage or shortage must be brought against the carrier by the purchaser. Clean Air Industries will provide assistance to the purchaser if necessary.

4.2 INSTALLATION PLANNING

Selecting the proper location for your dust collection equipment is very important. See Figure 2 for typical installation details.

Certain items should be considered when locating the unit, such as: room to empty the dust storage container(s) or hoppers; shortest run for location of ductwork; electrical connections; wall penetrations; fan discharge direction; and afterfilters. Ease of maintenance should also be considered when selecting the location and orientation of the system

!!!!! CAUTION !!!!!

Do not locate dust collector near dust source in cases where the dust is explosive or a fire hazard.

!!!!! CAUTION !!!!!

In preparing to install the unit, ensure location is clear of all obstructions, such as utility lines or roof overhangs, so the crane is free to maneuver if needed.

Page 6

sales@clean-air.com

1-866-665-1829

www.clean-air.com

Made with FlippingBook Annual report maker