Immersion & Suction Coolant Pumps
®
A Gorman-Rupp Company
Immersion Type Features † • Cast Iron Construction • Stainless Steel Impeller • Carbon Steel Shaft • Sealless Design for Pumping Abrasives • Pumps Liquids Down to 2” • Ideally Suited for Pumping Fine Contaminants
Suction Type Features * • Cast Iron Construction • Stainless Steel Impeller • Carbon Steel Shaft • Carbon/Ceramic Shaft Seal • Self-Priming up to 2’ - Maximum Suction Lift • Pumps Must be Mounted Above Liquid
Cross Reference to Replacement of Standard Machine Tool Industry Pumps Cross Reference to Replacement of Standard Machine Tool Industry Pumps
Stainless Impeller Model 5340-95 5341-95 5350-95 5351-95 5360-95 5370-95 5371-95 5380-95 5381-95 5390-95 5391-95 5400-95 5410-95
Old Fuji
Stainelss Im- peller Model
Fuji
Mitsubishi
Toshiba Hitachi
Yasukawa Graymills
Gusher Yasukawa Graymills Graymills Gusher Gusher
Fuji
Old Fuji
Mitsubishi
Toshiba Hitachi Hitachi
VKN-043A VKN-041A – CPS-041 VFPC-O1F IMS-08 — — CPS-041 VFPC-01F IMS-08 VBH-18 5340-95 VKN-053A VKN-051A NP-60J OPF-60M CPS-063 VFPC-061F IMS-08 VBH-18 5341-95 VKN-063A VKN-061A NP-100J OPF-100J CPS-103 VFPC-101F IMS-25 VBH-14 5350-95 VKN-073A VKN-071A NP-180J OPF-180J CPS-183 VFPC-181F IMS-25 VBH-14 5351-95 VKN-083A VKN-081A NP-250J OPF-250J CPS-253 VFPC-251F IMS-50 VBH-12 5360-95 VKN-093A VKN-091A NP-400J OPF-400J CPS-403 VFPC-401F IMS-75 VBH-34 5370-95 — — — — — — IMS-100 VBH-10 5371-95 VKP-043A VKN-041A — — CPD-041 VFPC-01DL IMV-08 VBV-18 5380-95 – VBH-18 VBH-18 VBH-14 VBH-14 VBH-12 VBH-34 – – – – – IMS-100 VBH-10 – – CPD-041 VFPC-01DL IMV-08 VBV-12 VBV-34 VKP-053A VKN-051A NQ-60J OPF-60M CPD-060M VFPC-061DIF IMV-08 VBV-18 5381-95 VKP-063A VKN-061A NQ-100J OPF-100M CPD-100M VFPC-100 IMV-25 VBV-14 5390-95 VKP-073A VKN-071A NQ-180J OPF-180M CPD-180M CPD-183 IMV-25 VBV-14 5391-95 VKP-083A VKN-081A NQ-250J OPF-250M CPD-253 VFPC-250JF IMV-50 VBV-12 5400-95 VKP-093A VKN-091A NQ-400J OPF-400M CPD-403 VFPC-4010JJF IMV-75 VBV-34 5410-95 Pump Dimensional & Specification Data Pump Dimensional & Specification Data VKN-053A VKN-051A NP-60J OPF-60M CPS-063 VFPC-061F IMS-08 VKN-063A VKN-061A NP-100J OPF-100M CPS-103 VFPC-101JF IMS-25 VKN-073A VKN-071A NP-180J OPF-180M CPS-183 VFPC-181JF IMS-25 VKN-083A VKN-081A NP-250J OPF-250M CPS-253 VFPC-251JF IMS-50 VKN-093A VKN-091A NP-400J OPF-400M CPS-403 VFPC-401JJF IMS-75 VKP-053A VKN-051A NQ-60J OPF-60M CPD-60M VFPC-061DIF IMV-08 VKP-063A VKN-061A NQ-100J OPF-100M CPD-100M VFPC-100 IMV-25 VKP-073A VKN-071A NQ-180J OPF-180M CPD-180M CPD-183 IMV-25 VKP-083A VKN-081A NQ-250J OPF-250M CPD-253 VFPC-250JF IMV-50 VKP-093A VKN-091A NQ-400J OPF-400M CPD-403 VFPC-4010JJF IMV-75 – VKP-043A VKN-041A VBV-18 VBV-18 VBV-14 VBV-14 VKN-043A VKN-041A
Voltage @ 60 Hz+
Full Load Amps Voltage @ 60 Hz+
Ship Wt. (Lbs.) Ship Wt. (Lbs.)
F NPT
Model Curve Type HP PH
A
B
C
D
E
G
H
J
Full Load Amps
F NPT
Model
*SUC 1/8 1 115/230 0.7/0.35 *SUC 1/8 3 230/460 0.3/0.19 *SUC 1/4 1 115/230 3.0/1.5 *SUC 1/4 3 230/460 0.8/0.4 Curve Type Type HP PH A *SUC *SUC *SUC *SUC 1/8 B 1/4
A
B
C
D
E
G
H
J
5340-95 5341-95 5350-95 5351-95 5360-95 5370-95 5380-95 5381-95 5390-95 5391-95
A
— 14 — 14 — 27 — 27 — 37 — 41 — 41 — 37
6.8 [172.2] 1.7 [43.2] 5.5 [139.7] 5.5 [139.7] 0.2 [5.1]
3/8" 6.7 [170.2] 0.8 [20.3]
B 5340-95 5341-95 5350-95 5351-95 5360-95 5370-95 A 5380-95 5381-95 B 5390-95 5391-95
1 115/230 0.7/0.35 3 230/460 0.3/0.19 1 115/230 3.0/1.5 3 230/460 0.8/0.4
6.8 [172.2]
1.7 [43.2]
5.5 [139.7] 5.5 [139.7] 0.2 [5.1] 3/8” 6.7 [170.2] 0.8 [20.3]
8.7 [220.1] 2.5 [63.5] 6.7 [170.2] 7.2 [182.9] 0.3 [7.6]
1/2" 7.8 [198.1] 0.8 [20.3]
8.7 [220.1]
2.5 [63.5]
1/2" 7.8 [198.1] 0.8 [20.3] 7.7 [195.6] 8.5 [215.9] 0.3 [7.6] ¾” 7.8 [198.1] 0.8 [20.3] 6.7 [170.2] 7.2 [182.9] 0.3 [7.6] ½” 7.8 [198.1] 0.8 [20.3]
C *SUC 1/2 3 230/460 1.8/1.25 10.3 [261.6] 2.8 [71.1] 7.7 [195.6] 8.5 [215.9] 0.3 [7.6] C *SUC 1/2 3 230/460 1.8/1.25 10.3 [261.6] 2.8 [71.1]
D *SUC 3/4 3 230/460 2.6/1.6 12.0 [304.8] 3.0 [76.2] 8.0 [203.2] 8.6 [218.4] 0.3 [7.6] 1" D *SUC 3/4 3 230/460 2.6/1.6 12.0 [304.8] 3.0 [76.2] 8.0 [203.2] 8.6 [218.4] 0.3 [7.6]
7.8 [198.1] 0.8 [20.3] 1” 7.8 [198.1] 0.8 [20.3]
†IMM 1/8 1 115/230 0.7/0.35 †IMM 1/8 3 230/460 0.3/0.19 †IMM 1/4 1 115/230 3.0/1.5 †IMM 1/4 3 230/460 0.8/0.4 A †IMM †IMM †IMM †IMM 1/8 B 1/4
1 115/230 0.7/0.35 3 230/460 0.3/0.19 1 115/230 3.0/1.5 3 230/460 0.8/0.4
15
11.7 [297.2] 6.0 [152.4] 4.8 [122.0] 5.0 [127.0] 0.2 [5.1] 11.7 [297.2] 6.0 [152.4] 4.8 [122.0] 5.0 [127.0] 0.2 [5.1] 3/8” 6.7 [170.2] 0.8 [20.3] 3.5 [88.9] 15 3/8" 6.7 [170.2] 0.8 [20.3] 3.5 [88.9]
27
13.6 [345.4] 7.0 [177.8] 6.3 [160.0] 6.1 [154.9] 0.3 [7.6] 13.6 [345.4] 7.0 [177.8] 6.3 [160.0] 6.1 [154.9] 0.3 [7.6] ½” 7.8 [198.1] 0.8 [20.3] 4.7 [119.4] 27 1/2" 7.8 [198.1] 0.8 [20.3] 4.7 [119.4]
5400-95 5410-95 5400-95 C †IMM 1/2 3 230/460 1.8/1.25 18.3 [464.8] 9.5 [241.3] 7.7 [195.6] 6.7 [170.2] 0.3 [7.6] ¾” 7.8 [198.1] 0.8 [20.3] 5.3 [134.6] 40 5410-95 D †IMM 3/4 3 230/460 2.6/1.6 20.6 [523.2] 11.0 [279.4] 7.7 [195.6] 7.3 [184.4] 0.3 [7.6] 1” 7.8 [198.1] 0.8 [20.3] 5.8 [147.3] 48 5411-95 E †IMM 1 3 230/460 3.2/1.9 20.6 [523.2] 11.0 [279.4] 7.7 [195.6] 7.3 [184.4] 0.3 [7.6] 1” 7.8 [198.1] 0.8 [20.3] 5.8 [147.3] 50 C †IMM 1/2 3 230/460 1.8/1.25 18.3 [464.8] 9.5 [241.3] 7.7 [195.6] 6.7 [170.2] 0.3 [7.6] 3/4" 7.8 [198.1] 0.8 [20.3] 5.3 [134.6] 40 48 E †IMM 1 3 230/460 3.2/1.9 20.6 [523.2] 11.0 [279.4] 7.7 [195.6] 7.3 [184.4] 0.3 [7.6] 1" D †IMM 3/4 3 230/460 2.6/1.6 20.6 [523.2] 11.0 [279.4] 7.7 [195.6] 7.3 [184.4] 0.3 [7.6] 1" 7.8 [198.1] 0.8 [20.3] 7.8 [198.1] 0.8 [20.3] 50 5.8 [147.3] 5.8 [147.3] 5411-95
NOTE: Dimensions are in inches (millimeters) and have a tolerance of ±1/8". (+) 3-Phase models can also operate on 50 Hz. (This will change full load amps, service factor, RPM and performance.) NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8” (+) 3-Phase models can also operate on 50 Hz. (This will change full load amps, service factor, RPM, and performance.)
Maximum Recommended Viscosity:500 SSU Single (1) 115/230 VAC 60 Hz Three (3) 230/460 VAC 50/60 Hz MOTOR DATA: Pumps feature Totally Enclosed motors with sealed, permanently lubricated bearing for protection from dirt,moisture and soil. Available in:
† Immersion-type pumps require no bearings, seals, or packing, ideally suiting them for pumping liquids containing fine contaminants. For circulation of coolant and spraying of cutting oil in all machines, including grinders and applications with higher
* Suction-type pumps must be mounted above the liquid level as well as other remote locations, featuring a 2 ft. maximum suction lift. For circulating coolant, liquids with large amounts of foreign matter and spraying cutting oil in all types of machines,
Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA www.amtpump.com • 888-amt-pump (268-7867) The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation. ©2012 American Machine and Tool Company. All rights reserved.
®
A Gorman-Rupp Company
0716 0120
CLT-2
Made with FlippingBook Learn more on our blog