2˝ Self-Priming High Pressure Pumps • Cast Iron Construction with Aluminum Impellers • Viton Mechanical Seal with EPR/ EPDM Check Valve and O-Rings • 2” NPT Suction and Discharge Ports • Maximum Temperature 180°F • Max Flow 122 GPM • Max Head 270 Ft. (116 psi) • Self-Priming to 20 ft. • Closed Vane Aluminum Impeller Designed for High Pressure Performance • 7-1/2 to 10 HP TEFC, Single and Three Phase Motors • Optional Mounting Base Available (A200-90)
Model 4802-95 with A200-90 Optional Base
Performance of High Pressure Pumps
[psi]
90 [m] [ft.]
100 120 140 160 180 200 220 240 260 280 300
100 110 120 130
A = 480 Series 2" 7½ HP [5.59 kW] B = 480 Series 2" 10 HP [7.46 kW]
80
AMT 2” Self Priming High Pressure Pumps are self-priming high pressure booster pumps with a two stage impeller design to provide additional pressure. All models feature cast iron construction with aluminum impellers and Viton Mechanical Seals. Built- in EPR/EPDM check valve for fast priming are standard on all units. Fill and drain plugs for easy installation and servicing. These units are self-priming up to 20 feet and are suitable for high pressure applications such as dewatering, sprinkler/booster, irrigation, and fire protection. Units are close coupled and are available in 7-1/2 to 10 horsepower TEFC electric motors.
B
70
0 10 20 30 40 50 60 70 80 90
60
A
50
40
30
0 20 40 60 80
20
10
0
[U.S. gpm] [m 3 /h]
0
20
40
60
80
100 120 140 160
0
4
8
12 16 20 24 28 32 36
Capacity @ 3450 RPM (60 Hz) (*)Convert to psi, divide by 2.31 Liquid - Water specific gravity 1.0
4800-C00-W0.xlsx 3/7/2019
400 Spring Street • Royersford, PA 19468 USA www.amtpump.com • 888-amt-pump (268-7867) For use with nonflammable liquids compatible with pump component materials. Viton ® and Teflon ® are registered trademarks of E. I. Dupont.
®
SPE-23
A Gorman-Rupp Company
Made with FlippingBook Learn more on our blog