Inline Centrifugal Circulator Pumps
®
A Gorman-Rupp Company
Voltage @ 60 Hz
Full Load Amps
Ship Wt. (Lbs.)
Model
Curve HP PH ENC
A
B
C
W H**
5690-95 5710-95 5720-95
A B C
2.1 [5.3] 3.1 [7.9] 3.1 [7.9] 6.3 [16.0] 13.3 [33.8] 2.3 [5.8] 3.4 [8.6] 3.4 [8.6] 8.5 [21.6] 13.5 [34.3] 2.3 [5.8] 3.4 [8.6] 3.4 [8.6] 8.5 [21.6] 13.5 [34.3]
25 28 28
1/4 1 ODP 115
5.4
(**) This dimension may vary due to motor manufacturer’s speciifcations. NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8”. NOTE: Electric supply for ALL motors must be within ± 10% of nameplate voltage rating (e.g 230V ± 10%=207 to 253)
569/571 Series – Stainless Steel Impeller 572 series – Bronze Impeller
PUMPS ARE DESIGNED TO MOUNT
HORIZONTALLY OR VERTICALLY
Connection Flanges - Flange Kit Model Numbers Flanges Available - Standard NPT (Female) Pipe Thread
Flange Face to NPT Face Thickness
Model Series
3/4”
1”
1-1/4” 1-1/2”
2”
569 Series XCI C569-90 C569-91 C569-92 N/A
N/A
3/4” 3/4”
571 Series XCI C570-90 C570-91 C570-92 C570-93 N/A
572 Series XCI
N/A
N/A
N/A
N/A C570-98
1-1/2”
NOTE: NPT Flange Kits Include: 2 Flanges, 2 Buna-N Gaskets, 4 Bolts and Nuts
Standard Features
• High Efficiency Closed Impeller • Inline Centered Design, Centerline of Ports In Line with Motor Shaft • Maximum Working Pressure 150 PSI • QSP: Quick Ship Pump for Many Models
• 4-Bolt Flange Allows 360° Mounting Rotation in 90° Increments • 1/8" NPT Seal Wash/Vent Port Shipped Plugged • EPDM/EPR Mechanical Seals and O-Rings • Optional Buna-N Mechanical Seal and O-Ring Available • Close Coupled Design Reduces
Manufacturer Cross Reference
Model Series
Flange to Flange Width*
Bell & Gossett 100NFI
Armstrong Series
TACO Series
Dayton (Cast Iron)
Maintenance Requirements • Standard NEMA 56J Motor Mounting Dimensions • Stainless Steel (300 Series) Motor Shaft
569 571 572
6.4 8.5 8.5
S-25 H-41 S-35
110 113 120
4RD16 4RC91 4RC95
PR
2NFI
*Refers to B Dimensions
Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA
®
www.amtpump.com • 888-amt-pump (268-7867) The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation. ©2012 American Machine and Tool Company. All rights reserved.
A Gorman-Rupp Company
1212 0922
HVM-8
Made with FlippingBook Learn more on our blog