Inline 1-1/2˝ Circulator Pumps • Cast Iron Construction with Silicon Bronze Impeller • EPDM/EPR Mechanical Seal and Casing O-Ring Standard, Viton ® Option Available • Includes Mounting Flange Kit for 1-1/2˝ NPT • Special Flange Designed to Accept B&G Flange or Standard 150lb 4-Bolt Flange • Maximum Water Temperature 225° F (107° C)* • Maximum Flow 98 GPM • Maximum Head 32 Ft. (14 PSI) • 1/8˝ NPT Seal Wash/Vent Port • Single Phase or Three Phase TEFC 56C Motor
5860-95 Cast Iron Circulator Pump
Performance of 1½" Inline Circulator Pumps
[m] [ft.*]
100 110 120 130 140 150 160 170
10 12 14 16 18 20 22 24 26 28 30 32 34
10
A = 586 Series 1/3 HP [0.25 kW] .37 kW] B = 586 Series 1/2 HP [0 C = 586 Series 3/4 HP [0.56 kW]
9
Do NOT operate pump in this gray area
8
7
C
6
B
0 10 20 30 40 50 60 70 80 90
A
5
AMT Inline Circulator Pumps are designed for continuous duty liquid transfer and chemical processing for industrial/commercial systems. Pumps are available in a variety of material configurations to meet your specifications. Pumps are powered by a 56C NEMA Totally Enclosed Fan Cooled (TEFC) frame electric motor with 1/2" conduit connection. Pumps are interchangeable with other manufacturers. *Maximum temperature applies to water only.
1.00 SF
4
3
1.15 SF
[ft.*] [m]
0 2 4 6 8
2
0 2 4 6 8
1
NPSHR
0
0 120 130 140 0 10 20 30 40 50 60 70 80 90 100 11
[U.S. gpm] [m 3 /h]
0
5
10
15
20
25
30
Capacity @ 1725 RPM (60 Hz)
(*)Convert to psi, divide by 2.31
Liquid - Water specific gravity 1.0
400 Spring Street • Royersford, PA 19468 USA www.amtpump.com • 888-amt-pump (268-7867) For use with nonflammable liquids compatible with pump component materials.
®
HVM-9
Viton ® and Teflon ® are registered trademarks of E. I. Dupont.
A Gorman-Rupp Company
Made with FlippingBook Learn more on our blog