3
230/460 2/1
607T B607T
77
1/2 1
115/230 9/5 230/460 3/2 115/230 12/6 230/460 3/2 ®
608S B608S 608T B608T 609S B609S 609T B609T
84 80 90 84
5.4 [13.7] 6.5 [16.5] 3.1 [7.8] 1.4 [3.5] 0.5 [1.3] 4.0 [10.2]
4.0 [10.2]
19.5 [49.5] 8.0 [20.3] 11.5 [29.2]
TEFC
3/4
3
5.4 [13.7] 6.5 [16.5] 3.1 [7.8] 1.4 [3.5] 0.5 [1.3] 4.0 [10.2] Inline 1-1/2˝ Circulator Pumps 19.5 [49.5] 8.0 [20.3] 11.5 [29.2] 4.0 [10.2]
1 3
3/4
TEFC
Voltage @ 60 Hz +
Full Load Amps
A Gorman-Rupp Company
Model ‡
Curve
HP PH ENC
A
B
C
D
XCI (-95) = Cast Iron Construction with Bronze Impeller XB (-97) = Cast Bronze Construction with Bronze Impeller 5864 1/3 1 TEFC 115/230 7/4 230/460 2/1 A
n may vary due to the motor manufacturer’s specifications. dels can also operate on 50 Hz. (This will change full load amps, service factor and RPM.) ns are in inches (centimeters) and have a tolerance of ± 1/8”
Pump Dimensional & Specification Data 5865 3
5.4 [13.7] 6.5 [16.5] 3.1 [7.8] 1.4 [3.5
5862 5863 5860 5861
1/2 1
115/230 9/5 230/460 3/2 115/230 12/6 230/460 3/2
5.4 [13.7] 6.5 [16.5] 3.1 [7.8] 1.4 [3.5
B
TEFC
upply for all motors must be within ±10% of e voltage rating (Ex.230V ± 10%= 207 to 253)
3/4
3
B & G Cast Iron Equiv H
B & G Bronze Equiv
Full Load Amps Voltage @ 60 Hz +
Full Load Amps
B & G Equiv. S607S
Ship Wt. (Lbs.)
1 3
5.4 [13.7] 6.5 [16.5] 3.1 [7.8] 1.4 [3.5
C
3/4
TEFC
Voltage @ 60 Hz +
‡ Ship Wt. (Lbs.)
Model ‡ Model 5864-95 5865-95 5864 5865 5862-95 5863-95 5862 5863 5860-95
HP PH ENC Curve HP PH ENC Curve
A
B
C
D
E
F
G
L**
W
G
A
B
C
D
E
F
L**
W
H
1
115/230 7/4 230/460 2/1 115/230 9/5 230/460 3/2 115/230 12/6 230/460 3/2
80 77
5.4 [13.7] 5.4 [13.7] 5.4 [13.7]
6.5 [16.5] 6.5 [16.5] 6.5 [16.5]
3.1 [7.8] 3.1 [7.8] 3.1 [7.8]
1.4 [3.5] 1.4 [3.5] 1.4 [3.5]
0.5 [1.3] 0.5 [1.3] 0.5 [1.3]
4.0 [10.2]
4.0 [10.2] 4.0 [10.2] 4.0 [10.2]
19.5 [49.5] 19.5 [49.5] 19.5 [49.5]
8.0 [20.3] 8.0 [20.3] 8.0 [20.3]
11.5 [29.2] 11.5 [29.2]
19.5 [49.5] 8.0 [20.3] 11.5 [29.2] ** This dimension may vary due to the motor manufacturer’s specifications. (+) 3-Phase models can also operate on 50 Hz. (This will change full load amps, service factor NOTE:Dimensions are in inches (centimeters) and have a tolerance of ± 1/8” NOTE:Electric supply for all motors must be within ±10% of nameplate voltage rating (Ex.230V ± 10%= 207 to 253) S607S B607S 607T B607T 80 77 19.5 [49.5] 8.0 [20.3] 11.5 [29.2] 608S B608S 608T B608T 84 80 607T 608S 4.0 [10.2] 84 80
A
1/3
115/230 7/4 230/460 2/1 115/230 9/5 230/460 3/2 115/230 12/6 230/460 3/2 TEFC TEFC TEFC
1 3
TEFC 3
4.0 [10.2]
5.4 [13.7] 6.5 [16.5] 3.1 [7.8] 1.4 [3.5] 0.5 [1.3] 4.0 [10.2]
A
1/3
1/2 3/4
1
B
1/2 1
TEFC 3
608T 609S 609T
5.4 [13.7] 6.5 [16.5] 3.1 [7.8] 1.4 [3.5] 0.5 [1.3] 4.0 [10.2]
4.0 [10.2]
B
3/4
3
1
90 84
4.0 [10.2]
609S B609S 609T B609T 11.5 [29.2]
5860 5861 5861-95 3/4 S ARE DESIGNED TO T HORIZONTALLY R VERTICALLY C C
3/4
1 3
90 84
5.4 [13.7] 6.5 [16.5] 3.1 [7.8] 1.4 [3.5] 0.5 [1.3] 4.0 [10.2]
4.0 [10.2]
19.5 [49.5] 8.0 [20.3] 11.5 [29.2]
TEFC 3
XCI (-95) = Cast Iron Construction with Bronze Impeller XB (-97) = Cast Bronze Construction with Bronze Impeller
** This dimension may vary due to the motor manufacturer’s specifications. (+) 3-Phase models can also operate on 50 Hz. (This will change full load amps, service factor and RPM.) NOTE:Dimensions are in inches (centimeters) and have a tolerance of ± 1/8” NOTE:Electric supply for all motors must be within ±10% of nameplate voltage rating (Ex.230V ± 10%= 207 to 253)
PUMPS ARE DESIGNED TO MOUNT HORIZONTALLY OR VERTICALLY
PUMPS ARE DESIGNED TO MOUNT HORIZONTALLY OR VERTICALLY
Standard Features
• Includes Mounting Flange Kit for 1-1/2" NPT; Includes (2) Flanges, (2) Gaskets and Fasteners • Special Flange Designed to Accept B&G Flange or Standard 150 Lb. 4 bolt Flanges • 1/8” NPT Seal Wash/Vent Port • EPDM/EPR Mechanical Seal and Casing O-Ring Standard • Optional Viton ® Mechanical Seals and O-Rings Available • Stainless Steel (300 Series) Sleeve Protects Stub Shaft from Liquid
• Steel Shaft with Sealed Ball Bearing Design Permits Removal of Motor Without Disconnecting Pump or Loss of Liquid • High Efficiency Closed Bronze Impeller • Available in Either Single or Three Phase TEFC 56C Motors with Standard NEMA Mounting Dimensions • Maximum Working Pressure 150 PSI
Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA
®
www.amtpump.com • 888-amt-pump (268-7867) The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation. ©2012 American Machine and Tool Company. All rights reserved.
A Gorman-Rupp Company
0915 0922
HVM-10
Made with FlippingBook Learn more on our blog