®
Centrifugal Pumps
A Gorman-Rupp Company
Pump Dimensional & Specification Data
Voltage @ 60 Hz
Full Load Amps
Ship Wt. (Lbs.)
Model 368A 368B 368C 370B 370F 370A 370C 370E 370D 369C 369F 369A 369B 369D 369E
Curve HP PH ENC
SUC*
DIS*
A
B**
C
E
L**
W**
H
A 1/3 1 TEFC 115/230
7/4 9/5 3/2 9/5 3/2 9/5 3/2
3/4
1/2 5.4 [13.7] 5.1 [13.0] 6.2 [15.9] 1.4 [3.6] 13.0 [33.0]
8.3 [21.3] 8.3 [21.3] 8.3 [21.3] 8.8 [22.5] 8.8 [22.5] 8.8 [22.5] 8.8 [22.5] 8.8 [22.5] 8.8 [22.5] 8.8 [22.5] 8.8 [22.5] 8.8 [22.5] 8.8 [22.5] 8.8 [22.5] 8.8 [22.5]
8.6 [21.8] 8.6 [21.8] 7.2 [18.3] 8.6 [21.8] 7.2 [18.3] 8.6 [21.8] 7.2 [18.3] 8.6 [21.8] 7.2 [18.3] 8.6 [21.8] 7.2 [18.3] 8.6 [21.8] 7.2 [18.3] 8.5 [21.6] 8.5 [21.6]
34 35 31 36 32 41 33 42 37 38 43 52 41 54 46
1 3 1 3 1 3 1 3 1 3 1 3 1 3
115/230 230/460 115/230 230/460 115/230 230/460
5.4 [13.7] 5.1 [13.0] 6.2 [15.9] 1.4 [3.6] 13.0 [33.0]
B 1/2
TEFC
3/4
1/2
5.4 [13.7]
N/A 6.4 [16.4] 1.4 [3.6] 12.4 [31.5]
5.9 [14.9] 5.1 [13.0] 6.3 [16.1] 1.4 [3.6] 13.0 [33.0]
C 1/2
TEFC
1
3/4
5.9 [14.9]
N/A 6.5 [16.5} 1.4 [3.6] 12.4 [31.5]
5.9 [14.9] 5.1 [13.0] 6.3 [16.1] 1.4 [3.6] 13.5 [34.4]
D 3/4
TEFC
1
3/4
5.9 [14.9]
N/A 6.5 [16.5} 1.4 [3.6] 13.1 [33.2]
115/230 12/6
5.9 [14.9] 5.1 [13.0] 6.3 [16.1] 1.4 [3.6] 13.9 [35.5]
E
1
TEFC
1
3/4
230/460
4/2
5.9 [14.9]
N/A 6.5 [16.5} 1.4 [3.6] 12.4 [31.5]
115/230 12/6
6.0 [15.2] 5.1 [13.0] 6.3 [16.1] 1.2 [3.3] 13.9 [35.5]
F
1
TEFC
1 ¼ 1
230/460
4/2
6.0 [15.2]
N/A 6.5 [16.5} 1.2 [3.3] 12.4 [31.5]
115/230 18/9
6.0 [15.2] 5.1 [13.0] 6.3 [16.1] 1.2 [3.3] 14.2 [36.3]
G 1 ½
TEFC
1 ¼ 1
230/460
5/3
6.0 [15.2]
N/A 6.5 [16.5} 1.2 [3.3] 14.1 [35.8]
115/230 22/11
6.0 [15.2] 5.0 [12.7] 6.3 [16.1] 1.2 [3.3] 15.1 [38.5]
H 2
TEFC
1 ¼ 1
230/460
6/3
6.0 [15.2]
N/A 6.5 [16.5} 1.2 [3.3] 14.6 [37.1]
(*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to motor manufacturer’s speciifcations. (+) 3-Phase motors can also operate on 50 Hz. (this will change full load amps, service factor and RPM) NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/4”. NOTE: Electric supply for ALL motors must be within ± 10% of nameplate voltage rating (e.g 230V ± 10%=207 to 253)
Maximum Solids Handling Capcity: 1/8” Diameter
‡ When Ordering, Add the Correct (-9X) Suffix to Model Number Indicating Material Selection (Ex. 368A-95) XCI (-95) C ast Iron Construction with Stainless Steel Impeller and Buna-N Seals XB (-97) C ast Bronze Construction with Viton ® Seals XSS (-98) Cast Stainless Steel Construction with Viton ® Seals
Standard Features
• Stainless Steel, Bronze and Cast Iron Construction • Buna-N or Viton ® Mechanical Seal and O-ring, Depending on Model • Optional Silicon Carbide Mechanical Seals Available • Stainless Steel Motor Shaft and Hardware • NEMA 56J TEFC Single or Three Phase Motors • NEMA Base Mounted Motor • Self-cleaning Impeller
• Discharge Rotates in 90° Increments • Maximum Working Pressure 75 PSI • Maximum Temperature • Viton ® 200° F • Buna-N 180° F • Front Drain Plug • QSP – Quick Ship Pump for Many Models
Hazardous Duty/Xplosion Proof motors available from stock ranging from 1 to 10 HP; CALL FOR QUOTATION & LEAD TIME!
Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA
®
www.amtpump.com • 888-amt-pump (268-7867) The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation. ©2022 AMT Pump Company. All rights reserved.
A Gorman-Rupp Company
1212 0220
STE-8
Made with FlippingBook Learn more on our blog