®
Straight Centrifugal Pumps Pump Dimensional & Specification Data
A Gorman-Rupp Company
Voltage @ 60 Hz
Full Load Amps SUC* DIS* A**
Ship Wt. (Lbs.)
Model
Curve HP PH ENC
B**
C**
D
E
F
L**
W H
5022 5023 5020 5021 5032 5033 5030 5031
1 3 1 3 1 3 1 3
115-208/230 12/6 208-230/460 4/2 115-208/230 22/11 208-230/460 6/3 115-208/230 28/14 208-230/460 7/4
5.1 [13.0]
14.6 [37.1] 13.6 [34.5] 15.1 [38.3] 15.1 [38.3] 15.3 [38.9] 15.1 [38.3] 15.8 [40.1] 15.9 [40.3]
54 54 55 55 65 65 74 74
A 1
TEFC
N/A
7.1 [18.0]
0.1 [0.3]
1.6 [4.0]
3.3 [8.5]
9.7 [24.7]
8.4 [21.2]
1 ¼ 1
5.1 [13.0]
B 1 ½
TEFC
N/A
5.4 [13.8]
5.1 [13.0]
C 2
TEFC
N/A
6.6 [16.7]
0.4 [1.1]
1.5 [3.8]
3.4 [8.6]
10.0 [25.4]
8.9 [22.7]
1½ 1 ¼
208/230
16
5.0 [12.7]
D 3
TEFC
208-230/460 8/4
N/A
(*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to motor manufacturer’s speciifcations. (+) 3-Phase motors can also operate on 50 Hz. (this will change full load amps, service factor and RPM) NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/4”. NOTE: Electric supply for ALL motors must be within ± 10% of nameplate voltage rating (e.g 230V ± 10%=207 to 253)
Maximum Solids Handling Capcity: 1/8” Diameter
‡ When Ordering, Add the Correct (-9X) Suffix to Model Number Indicating Material Selection (Ex. 5023-95) XCI (-95) C ast Iron Construction with Viton ® Seals XSS (-98) Cast Stainless Steel Construction with Viton ® Seals (All Models Come Standard with Stainless Steel Impeller)
Standard Features
• Stainless Steel, and Cast Iron Construction • Viton ® Silicon Carbide Mechanical Seal and O-ring • Optional EPDM/EPR Mechanical Seals Available • Stainless Steel Motor Shaft and Hardware • NEMA TEFC Single or Three Phase 3450 RPM Motors • NEMA Base Mounted Motor
• Stainless Steel Impeller • Discharge Rotates in 90° Increments • Maximum Working Pressure 150 PSI • Maximum Temperature 200° F • (3) Front Drain Plugs, Located 90° Apart • QSP – Quick Ship Pump for Many Models
Hazardous Duty/Xplosion Proof motors available from stock ranging from 1 to 10 HP; CALL FOR QUOTATION & LEAD TIME!
Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA
®
www.amtpump.com • 888-amt-pump (268-7867) The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation. ©2022 AMT Pump Company. All rights reserved.
A Gorman-Rupp Company
1212 0221
STE-10
Made with FlippingBook Learn more on our blog