®
12 Volt DC Washdown Pumps
A Gorman-Rupp Company
Pump Dimensional & Specification Data
Model ‡
SUC*
DIS*
L**
W
H
Ship Wt. (Lbs.)
12DC
1¼
1
15.5 [39.3]
7.9 [20.0]
8.5 [21.6]
57
(*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to motor manufacturer’s speciifcations. NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/4”. NOTE: Electric supply for ALL motors must be within ± 10% of nameplate voltage rating (e.g 230V ± 10%=207 to 253)
Maximum Solids Handling Capacity: 3/16” Diameter
‡ When Ordering, Add the Correct (-9X) Suffix to Model Number Indicating Material Selection (Ex. 12DC-95) XCI (-95) C ast Iron Construction with Buna-N Seals XSS (-98) Cast Stainless Steel Construction with Viton ® Seals
Standard Features
• 300 Investment Cast Stainless Steel and Cast Iron Construction • Buna-N or Viton ® Mechanical Seal and O-ring, Depending on Model • 12 Volt DC 7/8 HP Washdown Duty Motor with Stainless Steel Shaft • Maximum Working Pressure 150 PSI • Premium Washdown Duty Motor for Severe and Wet Operating Conditions
• Discharge Rotates in 90° Increments • Maximum Temperature • Viton ® 200° F • Buna-N 180° F • Stainless Steel Impeller • (4) Front Drain Plugs, Located 90° Apart • QSP – Quick Ship Pumps
Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA
®
www.amtpump.com • 888-amt-pump (268-7867) The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation. ©2022 AMT Pump Company. All rights reserved.
A Gorman-Rupp Company
1212 0220
STE-12
Made with FlippingBook Learn more on our blog