®
Heavy Duty Centrifugal Pumps
A Gorman-Rupp Company
Pump Dimensional & Specification Data
Frame Size ENC
Voltage @ 60 Hz
Full Load Amps SUC* DIS*
Ship Wt. (Lbs.)
Model 3156 3150 3157 315A 3151 315B 315E 3152 4264 4260 4265 4261
Curve HP PH
A**
B**
C**
D**
E
F**
G
J**
K
L**
W**
H
1 56J 3 145JM 3 56J 1 56J 3 182JM 3 56J 1 184JM 3 184JM 1 213JM 3 184JM 1 215JM 3 215JM 1 213JM 3 184JM 1 215JM 3 215JM
115/230 22/11 230/460 6/3 230/460 6/3
2 1 ½ 5.4 [13.8] 5.0 [12.7] 8.5 [21.8] 3.5 [8.9] 2.5 [6.4] 4.0 [10.2] 4.3 [11.0] 2.4 [6.2] 1.3 [3.5] 17.4 [44.2] 10.6 [26.9] 9.6 [24.4] 78 6.1 [15.5] 3.5 [8.9] 10.7 [27.1] 3.5 [8.9] 2.5 [6.4] 4.0 [10.2] 4.4 [11.3] 2.7 [7.0] 1.3 [3.5] 19.2 [48.7] 11.4 [28.9] 9.6 [24.4] 84 5.4 [13.8] 3.6 [9.1] 8.5 [21.8] 3.5 [8.9] 2.5 [6.4] 4.0 [10.2] 4.3 [11.0] 2.4 [6.2] 1.3 [3.5] 16.9 [42.9] 10.6 [26.9] 9.6 [24.4] 71 2 1 ½ 5.4 [13.8] 5.0 [12.7] 8.6 [21.8] 3.5 [8.9] 2.5 [6.4] 4.0 [10.2] 4.3 [11.0] 2.4 [6.2] 1.3 [3.5] 17.9 [45.4] 10.6 [26.9] 9.6 [24.4] 87 7.1 [18.0] 3.5 [8.9] 10.9 [27.6] 4.5 [11.4] 2.5 [6.4] 4.0 [10.2] 4.4 [11.3] 3.7 [9.5] 0.3 [0.9] 20.0 [50.8] 12.8 [32.5] 9.6 [24.4] 137 5.4 [13.8] 3.6 [9.1] 8.5 [21.8] 3.5 [8.9] 2.5 [6.4] 4.0 [10.2] 4.3 [11.0] 2.4 [6.2] 1.3 [3.5] 17.4 [44.2] 10.6 [26.9] 9.6 [24.4] 75 2 1 ½ 7.8 [19.9] 6.6 [16.8] 10.8 [27.6] 4.5 [11.4] 2.5 [6.4] 4.0 [10.2] 4.4 [11.3] 37. [9.5] 0.3 [0.9] 24.2 [61.4] 13.9 [35.3] 9.6 [24.4] 143 7.1 [18.0] 6.6 [16.8] 10.8 [27.6] 4.5 [11.4] 2.5 [6.4] 4.0 [10.2] 4.4 [11.3] 3.7 [9.5] 0.3 [0.9] 21.7 [55.1] 12.8 [32.5] 9.6 [24.4] 145 3 3 9.0 [22.9] 7.3 [18.7] 12.3 [31.4] 5.2 [13.3] 2.7 [7.0] 4.5 [11.4] 4.7 [12.1] 4.2 [10.8] 0.2 [0.7] 27.0 [68.6] 16.2 [41.1] 12.0 [30.4] 205 7.0 [18.0] 6.6 [16.8] 11.6 [29.5] 4.5 [11.4] 2.7 [7.0] 4.5 [11.4] 4.7 [12.1] 3.7 [9.5] 1.0 [2.6] 22.5 [57.1] 14.3 [36.3] 12.0 [30.4] 172 3 3 9.0 [22.9] 6.2 [15.7] 12.3 [31.4] 5.2 [13.3] 2.7 [7.0] 4.5 [11.4] 4.7 [12.1] 4.2 [10.8] 0.2 [0.7] 27.0 [68.5] 16.2 [41.1] 12.0 [30.4] 213 8.1 [20.7] 7.3 [18.7] 12.3 [31.4] 5.2 [13.3] 2.7 [7.0] 4.5 [11.4] 4.7 [12.1] 4.2 [10.8] 0.2 [0.7] 26.0 [66.0] 15.0 [38.1] 12.0 [30.4] 204
A
2
TEFC
230
12
B 3
TEFC
230/460 8/4 230/460 8/4
230
16
C
5
TEFC
230/460 17/9
230
32
D 7 ½
TEFC
230/460 22/11
230
40
E 10
TEFC
230/460 26/13
4242 4240 4253 4250
230
32
9.0 [22.9] 7.3 [18.7] 11.3 [28.9] 5.2 [13.3] 2.4 [6.2] 3.8 [9.7] 4.4 [11.3] 4.2 [10.8]
N/A 26.0 [66.0] 14.6 [37.1] 11.1 [28.1]
196
F 7 ½
TEFC
2 1 ½
230/460 22/11
7.1 [18.0] 6.6 [16.8] 10.6 [27.0] 4.5 [11.4] 2.4 [6.2] 4.5 [11.4] 4.5 [11.4] 3.7 [9.5] 0.1 [0.3] 21.5 [54.6] 12.6 [32.0] 10.5 [26.7] 163
230
40
3 2 9.0 [22.9] 5.5 [14.2] 11.5 [29.3] 5.2 [13.3] 2.7 [7.1] 4.7 [12.1] 5.0 [12.9] 4.2 [10.8] 0.3 [0.9] 26.1 [66.3] 15.9 [40.4] 10.6 [26.9] 217 8.1 [20.7] 7.3 [18.7] 11.5 [29.3] 5.2 [13.3] 2.7 [7.1] 4.7 [12.1] 5.0 [12.9] 4.2 [10.8] 0.3 [0.9] 25.2 [64.0] 14.7 [37.3] 10.6 [26.9] 208
G 10
TEFC
230/460 26/13
4251 H 15 3 215JM TEFC 230/460 47/24 3 2 8.1 [20.7] 7.3 [18.7] 11.5 [29.3] 5.2 [13.3] 2.7 [7.1] 4.7 [12.1] 5.0 [12.9] 4.2 [10.8] 0.3 [0.9] 25.2 [64.0] 14.7 [37.3] 10.6 [26.9] 218
NOTE: Check Price Book for Specific Pump Construction/Material Availability. Maximum Solids Handling Capcity: 1/4” Diameter
(*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to motor manufacturer’s speciifcations. (+) 3-Phase motors can also operate on 50 Hz. (this will change full load amps, service factor and RPM) NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/4”. NOTE: Electric supply for ALL motors must be within ± 10% of nameplate voltage rating (e.g 230V ± 10%=207 to 253)
‡ When Ordering, Add the Correct (-9X) Suffix to Model Number Indicating Material Selection (Ex. 315A-95) XCI (-95) C ast Iron Construction with Buna-N Seals XSS (-98) Cast Stainless Steel Construction with Viton ® Seals (All Models Come Standard with Stainless Steel Impeller)
Standard Features
• Stainless Steel and Cast Iron Construction • Buna-N or Viton ® Mechanical Seal and O-ring, Depending on Model • Optional Silicon Carbide Mechanical Seals Available • Stainless Steel Motor Shaft and Hardware • NEMA TEFC Single and Three Phase Motors, Depending on Model • Optional Mounting Base Available for 182/184/215 JM Frames • Self-cleaning Stainless Steel Impeller
• Maximum Working Pressure 150 PSI • Maximum Temperature • Viton ® 200° F • Buna-N 180° F • Optional Seal Wash Port and Hose Available on All Models • Pedestal Version Models Available for Frame Models 145/182/184JM • QSP – Quick Ship Pump for Many Models • Solids Handling Design
Hazardous Duty/Xplosion Proof motors available from stock ranging from 1 to 10 HP; CALL FOR QUOTATION & LEAD TIME!
Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA
®
www.amtpump.com • 888-amt-pump (268-7867) The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation. ©2020 AMT Pump Company. All rights reserved.
A Gorman-Rupp Company
0716 0322
STE-16
Made with FlippingBook Learn more on our blog