®
Centrifugal Chemical Pump
A Gorman-Rupp Company
Pump Dimensional & Specification Data
Voltage @ 60 Hz +
Full Load Amps
Ship Wt. (Lbs.)
Model
Curve HP PH ENC
SUC*
DIS*
A**
B
C**
L**
W**
H
07ES05C-1P 07ES05C-3P 1ES07C-1P 1ES07C-3P 1ES10C-1P 1ES10C-3P 12ES15C-1P 12ES15C-3P 15ES20C-1P 15ES20C-3P 2ES30C-1P 2ES30C-3P
1 3 1 3 1 3 1 3 1 3 1 3
115-208/230 9/5 208-230/460 3/2 115-208/230 9/5 208-230/460 3/2 115-208/230 12/6 208-230/460 4/2 115-208/230 22/11 208-230/460 6/3 115-208/230 28/14 208-230/460 7/4
5.4 [13.8] 2.6 [6.7] 5.1 [12.9] 13.9 [35.3]
10.1 [25.7] 10.1 [25.7] 10.1 [25.7] 10.1 [25.7] 10.1 [25.7] 10.1 [25.7] 10.3 [26.1] 10.3 [26.1] 10.3 [26.1] 10.3 [26.1] 10.3 [26.1] 10.3 [26.1]
9.9 [25.1] 9.5 [24.1] 9.9 [25.1] 9.5 [24.1] 9.9 [25.1] 9.5 [24.1] 9.9 [25.1] 9.8 [24.9] 9.8 [24.9] 9.8 [24.9] 9.8 [24.9] 9.8 [24.9]
47 43 52 44 53 52 64 54 67 59 75 63
A 1/2
3/4
3/4
5.4 [13.8] 2.6 [6.7]
N/A 13.2 [33.5]
5.4 [13.8] 2.6 [6.7] 5.1 [12.9] 14.4 [36.5]
B 3/4
1
1
5.4 [13.8] 2.6 [6.7]
N/A 13.9 [35.3]
5.4 [13.8] 2.6 [6.7] 5.1 [12.9] 14.6 [37.1]
C
1
1
1
5.4 [13.8] 2.6 [6.7]
N/A 132. [33.5]
TEFC
5.4 [13.8] 3.2 [8.3] 5.1 [12.9] 15.6 [39.6]
D 1½
1¼ 1¼
5.4 [13.8] 3.2 [8.3]
N/A 15.4 [39.1]
5.4 [13.8] 3.2 [8.3] 5.0 [12.7] 16.3 [41.4]
E
2
1½ 1½
5.4 [13.8] 3.2 [8.3]
N/A 15.9 [40.4]
208/230
16
5.4 [13.8] 3.2 [8.3] 5.0 [12.7] 16.8 [42.6]
F
3
2
2
208-230/460 8/4
5.4 [13.8] 3.2 [8.3]
N/A 16.4 [41.6]
(*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to motor manufacturer’s speciifcations. (+) 3-Phase motors can also operate on 50 Hz. (this will change full load amps, service factor and RPM) NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/4”. NOTE: Electric supply for ALL motors must be within ± 10% of nameplate voltage rating (e.g 230V ± 10%=207 to 253)
Maximum Solids Handling Capcity: 3/8” Diameter
Standard Features • NEMA Dual Cycle 50/60 Hz Base Mounted Motor • Self-cleaning Impeller • Discharge Rotates in 45° Increments • Maximum Working Pressure 125 PSI
• Cast Iron Construction • EPDM/EPR Mechanical Seal and O-rings • 303 Stainless Steel Motor Shaft • NEMA 56J TEFC Single or Three Phase Motors
• Maximum Temperature 180° F • Front Drain Plugs • QSP—Quick Ship Pump for Many Models • Solids Handling Design
Hazardous Duty/Xplosion Proof motors available from stock ranging from 1 to 10 HP; CALL FOR QUOTATION & LEAD TIME!
Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA
®
www.amtpump.com • 888-amt-pump (268-7867) The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation. ©2022 AMT Pump Company. All rights reserved.
A Gorman-Rupp Company
1212 1222
STE-18
Made with FlippingBook Learn more on our blog