® A Gorman-Rupp Company 1750 RPM Straight Centrifugal Pump
Pump Dimensional & Specification Data
Voltage @ 60 Hz +
Full Load Amps SUC* DIS*
Ship Wt. (Lbs.)
Model
Curve HP PH Frame ENC
A**
B
C
D
E
F
G
J
L**
W**
H
208- 230/460 22/11 2 1-1/2 7.5 [19.1] 4.5 [11.4] 10.9 [27.8] 6.3 [16.0] 3.8 [9.7] 5.5 [14.0] 5.5 [14.0] 7.5 [19.1] 21.1 [53.7] 16.0 [40.6] 12.8 [32.5] 195
420A-95
A 5 3 182JM TEFC
Maximum Solids Handling Capcity: 1/4” Diameter
(*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to motor manufacturer’s speciifcations. (+) 3-Phase motors can also operate on 50 Hz. (this will change full load amps, service factor and RPM) NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/4”. NOTE: Electric supply for ALL motors must be within ± 10% of nameplate voltage rating (e.g 230V ± 10%=207 to 253)
Standard Features
• Cast Iron Construction • Viton ® Silicon Carbide/Carbon Mechanical Seal • Silicon Bronze Precision Cast Dynamically Balanced Impeller • Bronze Case Wear Ring • 2 " x 1.5 " NPT Ports • 1/4 " NPT Gauge Taps on Suction & Discharge Ports for System Monitoring
• Bronze Shaft Sleeve to Protect Motor Shaft • Maximum Casing Pressure 175 PSI • Maximum Temperature 200° F • Includes Seal Flush/Air Relief Valve • Front Drain Plugs • 1750 RPM TEFC JM NEMA Frame IE2/EPAC Energy Efficient Motors
Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA
®
www.amtpump.com • 888-amt-pump (268-7867) The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation. ©2022 AMT Pump Company. All rights reserved.
A Gorman-Rupp Company
1212 0220
STE-20
Made with FlippingBook Learn more on our blog