16
Telephone 020 8400 2020
Carpenters Square Metric/Imperial
4 Piece Combination Set Measuring
• 12”/300mm or 300mm Blade Combination Set • Blade, Square Head, Protractor, Centre Head • Blade is fully hardened and tempered • Hardened steel square head 90°& 45° angles • Double indexed protractor is graduated180 degrees in both directions
PDF 1572 CLICK FOR
• Complete with Cast Steel Square Head and 12”/300mm Stainless Steel Blade • Square Head provides 90 and 45 degree angles and includes a spirit level and scribe point • Stainless Steel Blade has ground edges • Marked Metric on front face in 1mm increments • Marked Inch on rear face in 1” with 1/16” and 1/8” graduations
Offer Price
Order Code
Description/ Size
List Price
£94.95 £94.95 £12.70 £12.70 £27.00 £34.40 £29.40
£139.90 £139.90 £18.20 £18.20 £38.60 £49.20 £42.00
12” H 4 PC C/S 32/0.5/64/MM GRAD 300MM H 4 PC C/S 0.5/MM/0.5/MM 12” BLADE 32/0.5/MM/64/1.0/MM 300MM BLADE 0.5/MM/0.5/MM CENTRE HEAD PROTRACTOR HEAD SQUARE HEAD
7227-012H 7228-300H 7230-012 7230-300 7230-CEN 7230-PRO 7230-SQA
PDF 1570 CLICK FOR
Order Code 7122-012
Description/Size Carpenters Square Met/Imp
List Price £38.80
Offer Price £26.40
Square End Protractor
Round End Protractor
Depth Gauges Metric 150mm Metric/Imperial 150mm / 6"
PDF 1567 CLICK FOR
PDF 1568 CLICK FOR
• Head manufactured from fully hardened steel • Base measurement: 2½” wide x 1/8” thick • Top surface: 1” wide x 1/8” thick • Blade width: 5.2mm x 1mm • Depth rule graduated both sides • Front face graduated in 1mm steps • Rear face graduated in 1/32” steps • Squareness accuracy of Rule to Base: 90˚ ±15 min
PDF 1563 CLICK FOR PDF 1564 CLICK FOR
• Square End Protractor • Made of tempered steel with satin chrome finish • Measures angles from 0-180° • Head measures 90mm x 52mm x 1mm thick • Accuracy ± 1/2°
• Round End Protractor • Made of tempered steel with satin chrome finish • Measures angles from 0-180° • Head measures 90mm x 52mm x 1mm thick • Accuracy ± 1/2°
Offer Price £9.10 £9.10
Order Code
Description/ Size Depth Gauge Metric Depth Gauge Met/Imp
List Price
Order Code 5177
Description/Size Square End Protractor
Order Code 5188
Description/Size Round End Protractor
£13.00 £13.00
List Price £22.00
List Price £22.00
Offer Price £15.40
Offer Price £15.40
705-M15 705-150
Double Square Metric/Imperial
Double Square Metric
Small Hole Gauges
• Set of 4 - A-D 3-13mm/.125”-.500” • These satin chrome plated gauges provide easy and accurate measurements of holes and slots • Knurled knob at the handle end provides sizes adjustment • Used to measure deep and shallow holes, slots and grooves • Hole size is obtained by measuring over the contact points with a micrometer • Fully hardened measuring tip for long life and accuracy • Meets or exceeds U.S. Federal Specification: GGG-C-95A/26 Jun 1987 PDF 1290 CLICK FOR
PDF 1566 CLICK FOR
PDF 1565 CLICK FOR
• 6” / 150mm blade is hardened, tempered and satin chrome plated for longer life. • Blade is adjustable for position in the accurately ground cast stock. • Stock can also be used as a parallel. • Graduation Readings: Both sides 32nds/64ths & 0.5mm/1.0mm
• 150mm blade is hardened, tempered and satin chrome plated for longer life. • Blade is adjustable for position in the accurately ground cast stock. • Stock can also be used as a parallel. • Graduation Readings: Both sides 0.5mm & 1.0mm
Order Code 7205-266
Description/Size Double Square Met/Imp
Order Code 7205-756
Description/Size Double Square Metric
Order Code 4S-4
Description/Size Small Hole Gauges
List Price £39.00
List Price £39.00
Offer Price £27.30
Offer Price £27.30
List Price £58.00
Offer Price £40.60
Made with FlippingBook flipbook maker