18
Telephone 020 8400 2020
Universal Bevel Protractor
Vee Block Set W O R K S H O P
•
PDF 1283 CLICK FOR
• Set contains 2 sizes of steel Vee Blocks with clamps • Each pair is matched and numbered for identification • Accuracy: Surfaces: Square and parallel within 0.0005” Vee Grooves: Square and parallel within 0.0005” All other dimensions of matched pair are within 0.0005” • Set supplied in a tough storage case
• Dial face & vernier in satin chrome. • Magnifier for easy reading of vernier scale. • Protractor dial graduated 360 x 1 degree. • Vernier scale reads to 5 minutes of arc. • Accuracy +/- 5 mins. • Supplied with 1 each 6”, 8” & 12” blades • Blades made from alloy steel, hardened & ground. • 1 x acute angle accessory.
Block Size Small Large
Length
Width
Height
Capacity
1-1.2” 2”
1-1/4” 1-1/2”
1-1/4” 1-1/2”
1” 1-1/2”
Order Code 51-550-012
Description/Size Protractor
Order Code 4905-V4
Description/Size Vee Block Set
PDF 1252 CLICK FOR
List Price £122.00
Offer Price £85.40
List Price £104.00
Offer Price £78.00
Centre Punch Set 5 piece
Pin Punch Set 8 Piece
Long Punch Set 5 piece
• Set contains 5 assorted centre punches with a selection of precision ground point sizes • Manufactured from tool steel • Both ends hardened and tempered between 45-52 HRC • Black Oxide Finish • Knurled body gives positive grip • Set supplied in a fitted plastic wallet with size markings
• Set contains 8 assorted Pin punches • Manufactured from tool steel • Both ends hardened and tempered between 45-52 HRC • Black Oxide Finish • Knurled body gives positive grip • Overall length: 4” • Parallel length: 5/8” • Set supplied in a fitted plastic wallet with size markings
• Set contains 5 assorted Long Pin punches • Manufactured from tool steel • Both ends hardened and tempered between 45-52 HRC • Black Oxide Finish • Knurled body gives positive grip • Overall length: 205mm • Parallel length: 100mm • Set supplied in a fitted plastic wallet with size markings
Order Code 6211-605
Description/Size Centre Punch Set 5 Piece
Order Code 6322-608
Description/Size 8 Piece Pin Punch Set
Order Code 6333-805
Description/Size Long Punch Set 5 Piece
List Price £17.20
List Price £26.80
List Price £25.20
Offer Price £12.00
Offer Price £18.75
Offer Price £17.60
Telescopic Hole Gauge Set
Chuck Type Tap Wrenches
Small Hole Gauges
• Set of 4 - A-D 3-13mm/.125”-.500” • These satin chrome plated gauges provide easy and accurate measurements of holes and slots • Knurled knob at the handle end provides sizes adjustment • Used to measure deep and shallow holes, slots and grooves • Hole size is obtained by measuring over the contact points with a micrometer • Fully hardened measuring tip for long life and accuracy • Meets or exceeds U.S. Federal Specification: GGG-C-95A/26 Jun 1987 PDF 1290 CLICK FOR
• These satin chrome plated gauges provide easy and accurate measurements of holes and slots • Two plungers under equal and constant spring pressure can be locked between the walls of a slot or across the diameter of a hole. • Final size is determined by measuring across the points of the plungers with a micrometer or caliper • Plunger tips are hardened and ground with radiussed ends • Knurled knob at the top of handle is used for locking the plungers
• T-handles slide both ways for tightening • Hardnened & tempered split collet chucks for positive grip • Knurled & hardened clamping nut • Spring tension holds handle in desired position • Wrench body has machined centre for use with lathe centres
PDF 1289 CLICK FOR
• Gauges have a satin chrome finish • Set of 6 - A-F 8-150mm 5/16-6” Order Code 3T-6
Order Code
Jaw Type Solid
Tap Size (mm) 1.5 - 4.0 4.0 - 6.25 6.25 - 12.50
Tap Size (Inch
List Price £8.50 £21.95 £27.30
Offer Price £5.95 £15.30 £19.00
Description/Size Telescopic Hole gauge Set
Order Code 4S-4
Description/Size Small Hole Gauges
1/16-5/32” 5/32-1/4” 1/4-1/2”
4311-211 4311-226 4311-236
List Price £84.00
Ratchet Ratchet
Offer Price £58.80
List Price £58.00
Offer Price £40.60
Made with FlippingBook flipbook maker