BACKWASH OPTIONS AND ADDITIONAL FEATURES STARK ™ FILTERS
CM200 Manual Backwash Controller (Backwash Option "M") This is the simplest Pentair option. No electronics or programming required; simply turn the knob to backwash each tank in the system.
CS 400 Semi-Auto Backwash Controller (Backwash Option "S") This controller is programmable and controls every aspect of the backwash cycle once initiated. Backwash can be initiated three ways: by an operator with the touch of a button, by a signal from a master controller (such as the AK600), or by a signal from an optional differential pressure switch (CS400-DP). Stored backwash data and history, alarms, and calculated backwash cycle times are also features of the CS400 controller, as are relays for communication with the heater, pump and Acu Drive.
Manway Viewport
Standard on all Stark Filters.
Commercial Lateral
2" NPT injection molded ABS with "V" groove slots and reinforcing ribs for best performance and service life. Also used on THS Series Filters.
Butterfly Valve Systems Tandem Butterfly Valve Configurations (Backwash Option TM; Single Tank Systems - each Stark backwash valve is replaced by a linked pair of butterfly valves.
Optional Pressure Booster System (PBS01) Provides consistent valve-actuation where city water pressure is unreliable.
CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm. AVERTISSEMENT: Peut Causer le Cancer et des Dommages au Système Reproducteur. P/N 200174.A www.p65warnings.ca.gov. ADVERTENCIA: Cáncer y Daño Reproductivo.
82
Made with FlippingBook - PDF hosting