house
house
Fusion Packages
GC_ICP93A50V FUSION / ICP-OES PACKAGE ELEMENTS AND REPORTING LIMIT(S) Ag 200 ppm - 1%
Co 200 ppm - 50% Cr 200 ppm - 50% Cu 40 ppm - 50% Fe 0.05% - 50% K 0.04% - 50% Li 800 ppm - 50% Mg 0.003% - 50% Mn 0.002% - 50%
Mo 300 ppm - 50% Ni 300 ppm - 50% Pb 800 ppm - 50% Sb 400 ppm - 50% Se 2,000 pm - 50% Sn 800 ppm - 50% Sr 10 ppm - 50%
Tl 2,000 ppm - 50% V 80 ppm - 50% Y 8 ppm - 50% Zn 300 ppm - 50%
Al 0.04% - 50%
As 1,200 ppm - 50% Ba 3 ppm - 50% Be 3 ppm - 50% Bi 400 ppm - 50% Ca 0.1% - 50 %
Cd 40 ppm - 50% Ti 0.02% - 50 % Additional elements can be added. An ICP-MS option is available. Requires a minimum sample weight of 0.2 g.
GC_AAS93A50V FUSION / AAS ELEMENTS AND REPORTING LIMIT(S) Al ≥ 0.02%
Fe ≥ 0.01 % Mg ≥ 0.005%
Si ≥ 0.07% Sn ≥ 0.05%
V ≥ 0.1%
Ca ≥ 0.06% Cr ≥ 0.005%
Zn ≥ 0.001%
Mn ≥ 0.005% Ti ≥ 0.05% Additional elements can be added. An ICP-MS option is available. Requires a minimum sample weight of 0.2 g. Concentrate samples containing greater than 50% of the target element can require alternative analytical methods.
FUSION / XRF PROCESS CONTROL-GRADE PACKAGES CODE(S)
ELEMENTS / LIMIT(S)
DESCRIPTION
GC_XRF72
Same available range and elements as
Borate fusion / XRF
GO_XRF72, refer to ore grade analysis section Same available range and elements as GCXRF72Fe1,
GC_XRF70V
Pyrosulphate fusion / XRF
INDIVIDUAL METHODS FOR PROCESS CONTROL-GRADE ANALYSIS
Fe2 GCXRF72LS and GO_XRF70V, refer to ore and commodities section
SULPHUR AND CARBON CODE(S)
Process Solution Packages
MIN. SAMPLE WT.(g)
ELEMENT
LIMIT(S) ≥ 0.01% ≥ 0.01% ≥ 0.05%
DESCRIPTION IR combustion
S C
0.1 - 0.3 0.1 - 0.3
GC_CSA06V
GC_ICP84T PROCESS SOLUTION PACKAGE / ICP-OES / NON-CYANIDE BASED ELEMENTS AND REPORTING LIMIT(S) Ag ≥ 0.08 ppm Co ≥ 0.3 ppm
GC_CSA08V GC_CLA01V
S 2-
Leach/Digest/IR
2.0
Mo ≥ 0.6 ppm Na ≥ 2 ppm Ni ≥ 0.6 ppm
Sr ≥ 0.002 ppm Ti ≥ 0.02 ppm Tl ≥ 3 ppm V ≥ 0.2 ppm Y ≥ 0.02 ppm Zn ≥ 0.7 ppm
Fe 2+ 0.25 Single elements can be determined by numerous decomposition techniques and finishes. Please contact your local laboratory for options. ≥ 0.5% Ferrous iron titration
Al ≥ 0.2 ppm As ≥ 3 ppm
Cr ≥ 0.1 ppm Cu ≥ 0.1 ppm Fe ≥ 0.2 ppm
Ba ≥ 0.007 ppm Be ≥ 0.002 ppm
P ≥ 5 ppm Pb ≥ 2 ppm Sb ≥ 1 ppm Se ≥ 3 ppm
ADDITIONAL SINGLE ANALYTES CODE(S)
K ≥ 1 ppm Li ≥ 2 ppm
ANALYTES
LIMITS
DESCRIPTION Gravimetric
MIN. SAMPLEWT.(g)
Bi ≥ 1 ppm
GC_CLA04V GC_CLA03V GC_CVA38B50
Insolubles (acid)
≥ 0.05%
1 2
Ca ≥ 0.9 ppm Cd ≥ 0.09 ppm
Mg ≥ 0.07 ppm Mn ≥ 0.04 ppm
CaO
≥ 5%
Available lime Cold vapour AAS
Sn ≥ 2 ppm Additional elements can be added. Requires a minimum sample volume of 10 mL. ICP-MS option may be available locally. Please enquire.
Hg
≥ 0.3 ppm
0.25
GC_ISE10V
pH (soils/sediments)
0.1 - 14
Ion selective electrode
20
SGS can analyze a number of individual ore-grade elements. Please enquire.
GC_ICP82T PROCESS SOLUTION PACKAGE / ICP-OES / CYANIDE BASED ELEMENTS AND REPORTING LIMIT(S) Ag ≥ 0.08 ppm Co ≥ 0.3 ppm
VOLUMETRIC AND GRAVIMETRIC METHODS FOR CONCENTRATES CODE(S) ELEMENT
Mo ≥ 0.6 ppm Na ≥ 2 ppm Ni ≥ 0.6 ppm
Sr ≥ 0.002 ppm Ti ≥ 0.02 ppm Tl ≥ 3 ppm V ≥ 0.2 ppm Y ≥ 0.02 ppm Zn ≥ 0.7 ppm
MIN. SAMPLE WT.(g)
LIMIT(S) 15 - 60% 5 - 95% 5 - 100% 10 - 80% 10 - 80% 10 - 95%
DESCRIPTION
Al ≥ 0.2 ppm As ≥ 3 ppm
Cr ≥ 0.1 ppm Cu ≥ 0.1 ppm Fe ≥ 0.2 ppm
GC_CON13V GC_CON03V GC_CON07V GC_CON11V GC_CON12V GC_CON08V
Cu Cu
Titration
0.25
Electroplating Electroplating
1.0 1.0 2.0 0.5
Ba ≥ 0.007 ppm Be ≥ 0.002 ppm
P ≥ 5 ppm Pb ≥ 2 ppm Sb ≥ 1 ppm Se ≥ 3 ppm
Ni
K ≥ 1 ppm Li ≥ 2 ppm
Pb Zn
Titration Titration Titration
Bi ≥ 1 ppm
Ca ≥ 0.9 ppm Cd ≥ 0.09 ppm
Mg ≥ 0.07 ppm Mn ≥ 0.04 ppm
Fe 0.25 Note: these elements can be analyzed to party or umpire quality standards (GT). Additional elements can be determined on concentrate samples in some SGS laboratories. Please enquire. Trade sample analyzes typically require moisture analysis and may require a larger minimum sample weight.
Sn ≥ 2 ppm Additional elements can be added. Requires a minimum sample volume of 10 mL. ICP-MS option may be available locally. Please enquire.
62
63
Made with FlippingBook Annual report maker