WWW.CONTROLTECHNIQUES.COM
Mounting & Environment
IP20 Conduit Box ULType 1 ingress protection (available as an accessory)
IP Rating
Storage Temperature
-40 °C to 60 °C (-4 °F to 140 °F) -20 °C to 40 °C (-4 °F to 104 °F)
Operating TemperatureWithout De-Rate
-20 °C to 60 °C (-4 °F to 140 °F) Frames 1 to 4 -20 °C to 55 °C (-4 °F to 131 °F) Frames 5 to 9
Operating Temperaturewith De-Rate
Cooling Altitude Humidity Pollution
Integral cooling fan
≤3000 m(≤1000 m no de-rate; 1000 m to 3000 m derate 1 % every 100 m)
95 % non-condensing at 40 °C / 104 °F - EN61800-2(3k3) Pollution degree 2 - dry, non-conducting pollution only
Reference standard IEC60068-2-27, IEC60068-2-29 bump test, IEC60068-2-64 randomvibration test, IEC60068-2-6, EN61800-5-1 sinusoidal vibration test. Tested to Environmental Category ENV3
Vibration
Mechanical Shock
Tested in accordancewith IEC 60068-2-27 and IEC 60068-2-29
Frame 1 to 4 – Surface mount via mounting holes or DIN Rail mount Frame 5 to 9 – Surface mount via mounting brackets or through-panel mount via through-panel mounting kit
Mounting Methods
Mounting Clearance Overvoltage Category Corrosive Environments
0 mm either side, 100 mm above and below Category III (IEC/EN/KN/UL61800-5-1)
EN 60721-3-3 ISO9223 Class C3
MaximumMotor Cable Length
75 m Frame 1 | 100 m Frames 2 to 4 | 200 m Frames 5 to 6 | 250 m Frames 7 to 9
Standards Approvals
CE (European Union), cUL Listed (USA and Canada), DNV (marine applications), KC (Korea), RCM (Australia/ New Zealand), EAC (Russian Customs Union), UKCA (United Kingdom), C-Tick (Australia)
E171230
Product Safety Standards
IEC/EN/KN/UL 61800-5-1, CSA C22.2 No.274, GB12668.501-2013
C300 models only: The Safe Torque Off (STO) function may be used as a safety component of a machine. Type examination certificates by TÜV Rheinland:
Frame sizes 1 - 4: No. 01/205/5383.03/18 Frame sizes 5 - 9: No. 01/205/5387.02/18 Functional safety parameters: EN ISO 13849-1 - Cat 4, PLe EN61800-5-2/EN62061/IEC 61508 - SIL3 UL functional safety approval: FSPC E171230
TÜV
IEC/ EN 61800-3 Immunity and Emissions EN 61000-6-2: Immunity for industrial environments EN 61000-6-4: Emissions for industrial environments
Product EMC Standards
EN 61000-3-2: Harmonic current emissions An EMC data sheet is available on request
RoHS
Complies with the Restriction of Hazardous Substances Directive (2011/65/EU)
Immunity Compliance
Second environment (Industrial)
ISO
Manufacturing facilities comply with ISO 9001:2015 and ISO 14001
Warranty Warranty
5Years (warranty terms and conditions apply)
Accessories Remote Interfaces Filters & Cables
Remote keypad IP66, Remote keypad RTC, HMI External EMC filters, CT communications cable
Communication & Feedback, SI-Options
AI-485 24 VAdaptor, SI-EtherCAT, SI-PROFIBUS, SI-Ethernet , SI-DeviceNET, SI-CANopen, SI-PROFINET , SI-POWERLINK, SI-Encoder
Back-up & Cloning
AI-Back-up Adaptor &AI-Smart Adaptor
Conduit Box
For ULType 1 ingress protection
Protection Conformal Coating DC Bus Undervoltage Error Level
100 V models: 175 Vdc | 200 V models: 175 Vdc | 400 V models: 330 Vdc | 575 V models: 435 Vdc | 690 V models: 435 Vdc Frame sizes 1 - 4: 100 V models: 510 Vdc | 200 V models: 510 Vdc | 400V models: 870 Vdc Frame size 5 - 9: 200V models: 415 Vdc | 400 V models: 830 Vdc | 575 V models: 990 Vdc | 690 V models: 1190 Vdc
DC Bus Overvoltage Error Level
Drive Overload Error
Programmable: Default settings: 180% for 3s, 150% for 60s
Instantaneous Overcurrent Error/Limit
220% of rated motor current
Phase Loss Error
DC Bus Ripple Threshold Exceeded
Overtemperature Error
Control Board Over Temperature, Inverter Model Temperature, Inverter Thermistor Temperature,Drive heatsink temperature exceeds 95°C (203°F)
Short Circuit Error Ground Fault Error
Protection against output phase-to-phase fault Protection against output phase-to-ground fault
Motor Thermal Protection
Electronically protects the motor from over-heating due to loading conditions Parameter set to avoid errors and machine downtime (needs to be configured)
Keep Running
Dedicated Thermistor Input General Items suppliedwith the drive
Avoid downtime or machine damage due to overheated motor
Step-By-Step Guide, Safety Information,Grounding bracket (Frames 1 to 4), Surface mounting brackets (frame 5 to 9)
15
Made with FlippingBook Publishing Software