This is an interactive catalogue showcasing all our printing solutions offered to you. Click the links and videos within the catalogue for more information.
Email: techsupport@jgelectronics.com
Tel: 011 789 6033
Web: www.jgelectronics.com How to Youtube Chanel Videos: (5) JG Electronics - YouTube _______________________________________________________________________________________
Instructions for: Sublimation Boxes
1. Set the heat press to 180°C and 60 seconds.
2. Some boxes will have a ribbon and double-sided tape pieces with the foldable box.
- Before pressing , carefully identify all fold or seam lines on the sublimatable box blank.
- Using light pressure, pre-fold each seam just enough to create a visible crease. Fold each seam in the correct direction, as you will do when doing the assembly in the end. Make it flat again after these steps.
3. Download the correct template for your box, you will divide your artwork into pieces to print and then cut each piece out as needed to apply to the box.
4. Line your artwork up very precisely on the smoother, more sheen glossy side of the box. Secure with heat tape from the inside of the box to the print:
5. In a 38x38cm size press or bigger, you can put the whole box inside the press by putting it from one corner to the other to fit in. Press for 60 seconds.
6. When done pressing, open the press and remove the prints, and heat the tape.
7. Fold the box on all the lines to look like the images below. Place double-sided tape on the little flaps if applicable with the box you are doing. (it will go on the printed side and stick the flaps to the inside of the box.)
Page 1 Page 2 Page 3 Page 4 Page 5Made with FlippingBook - professional solution for displaying marketing and sales documents online