Vektek Metric Chinese

动力供给

0.75 kW 先进、高效工装泵

先进工装泵 极低的碳足迹--保压时电机从不运行

 Fully configurable 0-4 valve stack to meet all workholding needs.  Manual or solenoid operated valves available in all configurations.  Custom designed pendant for solenoid operated valves.  Optional machine control cable for connection to CNC machine.  Vektek electronic pressure switch with analog output to VFD for pi loop control.  Return line filter with visual clog indicator is standard on all pumps.  127 mm oil level site glass, drain plug, and isolation foot pads.  Large filler / breather for easy oil changes and filling.  In-tank fluid level sensor, electronically connected to fault circuit.  10 Micron, return line filter for maximum protection and long life.  Visual or optional electronic filter clog indicator.  Vertical pump lift handle for use with crane or fork lift.  Horizontal lift handles for manual lifter and protection.  Reusable BUNA-N rubber gaskets with PSA backing throughout.  High efficiency, HI/LO 2-stage flow, 6 piston pump design.  Premium efficiency. VFD rated, TEFC, AC motor, .75 KW, 3-PH, 230/460 VAC, 50/60-HZ, 1800 RPM.  Variable frequency drive (VFD) motor control system, Configured for electrical inputs worldwide.

工装泵性能

基本泵流量/压力

 VFD internally protected from short circuit on all models.  No duty cycle limitations due to VFD thermal protection.

 Large 18.9 Liter reservoir designed for maximum usable oil volume.  5 Screen/filter components for maximum protection of pump and devices.  Working pressure range of 100-350 bar.

压力

回油管过滤器,可视指示器 可选电子指示器

故障指示灯 重启按钮

J-6

泵歧管使用或不使用叠加阀

开/关/点动 控制开关

大注油口/通气口

油位开关或可选油位/温度开关

立式提手

变频器和电 源控制箱

电子压力开关

悬吊开关I/0 块

回油口G1/4 母接头

648.2

压力口G1/4 母接头

2个横向提手

油位视镜

177.8

放油塞

2X 203.2

2X 355.6 2X 457.2 743

314.5

20.6

304.8

4个橡胶垫脚 1/4-20 安装孔

基本泵单元(未显示阀,阀选项请见泵配置部分)

ILMV459501 REV D

警告:使用滑阀时对 VektorFlo ® 泵的质保无效

规格

型号 基本重量 (kg) 基本 一级 二级 一级 二级 总的 可用的 最小至最大 无阀 泵流量 (升) 泵压力范围 (bar) 油箱容量 (总的) 油黏度 cSt @ 40°C

45-95X5-XX

5.7

0.84

0-48

48-350

18.9

13.2

72.6

22 至 46

© Vektek 2025年3月

电话 : +86-411-83779160 USA: +1-913-365-1045

www.vektek.cn

Made with FlippingBook - Online Brochure Maker