支撑缸
内置感应元件，高能力，液体推动式
B
K
M
4X R THRU S
C STROKE
N
E
D
J
AA
MANIFOLD HYDRAULIC PORT*
G HEX
B-8
Q
P
L
AB
AC
H
Y
X HYDRAULIC PORT*
A THREAD
F
V HEX x W THREAD
T
MANIFOLD AIR PORT
Y
Y
AD AIR INLET PORT
X HYDRAULIC PORT OR IN-PORT DEVICE*
ILMV100725 REV E
*THE P1, P2 AND MANIFOLD PORTS ARE ALL CONNECTED AND ANY OF THEM CAN BE CHOSEN TO CONNECT HYDRAULIC PRESSURE. IN-PORT DEVICES CAN ONLY BE INSTALLED IN P1.
For proper sealing, all mating surfaces should be flat within 0.08 mm with a maximum surface roughness of 1.6 µm R a . Hydraulic oil feed holes for manifold mounting Ø 2.3mm to Ø 5mm.
插装式尺寸
型号 A BCDEFGHJKLMNPQ 41-0806-20-PS M26 X 1.5 74.8 6.5 23.7 37 5.3 23 14.3 7.1 36 36 27 13.5 27 13.5 41-0806-26-PS M26 X 1.5 87.5 12.5 35.4 37 5.3 23 14.3 7.1 36 36 27 13.5 27 13.5 41-0808-20-PS M35 X 1.5 94.2 6.5 38.1 37 9.3 30 19 9.5 44 44 33 16.5 33 16.5 41-0808-26-PS M35 X 1.5 106.8 12.5 47.9 37 9.3 30 19 9.5 44 44 33 16.5 33 16.5 型号 R S T V W X YAAABAC AD 41-0806-20-PS 4.5 8 28 11 M8 x 1.25 x 5 G1/8 10.5 7 7 9 M5 x 0.8 41-0806-26-PS 4.5 8 28 13 M10 x 1.50 x 5 G1/8 10.5 7 7 9 M5 x 0.8 41-0808-20-PS 5.5 9.5 27 17 M12 x 1.75 x 6.5 G1/8 10.5 10 10 13 M5 x 0.8 41-0808-20-PS 5.5 9.5 27 17 M12 x 1.75 x 6.5 G1/8 10.5 10 10 13 M5 x .08
气检支撑缸的气体流动示意图
工件
提升阀关闭， 气压升高
提升阀打 开，空气 在接触螺 栓下方泄出
ILMV100728 REV A
支撑缸顶出
气感应控制套件 45-0824-00
气压感应开关
压力表
气源
最多8个阀
流量控制阀
气压调节器
进油孔
进气孔
ILMV504087 REV C
电话 : +86-411-83779160 USA: +1-913-365-1045
© Vektek 2025年3月
www.vektek.cn
Made with FlippingBook - Online Brochure Maker