TURBOSTREAM - VERTICAL TURBINE PUMPS
Experience gained from extreme environments such as off-shore oil & gas installations has led to the creation of the SyncroFlo FM/UL Vertical Turbine range of fire pumps. This range has been approved for fire protection by FM Approvals and Underwriter Laboratories, and is fully compliant to NFPA 20. Whether the fire protection water source is located below ground or deck level, the best technical pumping solution is the Vertical Suspended Multi Stage Turbine Pump. With this type of unit, the impellers are fully immersed in the water and maintain prime at all times. The pumps are driven by vertical electric motors or by diesel engines through a right angle gearbox. SyncroFlo Vertical Turbine pumps can be custom engineered for the oil and gas industry and can handle fresh water or sea water for cooling purposes, fire protection duties, general water supply and washdown or drill water. They can also be used for handling crude oil or controlling spillages. For platform or jetty locations, they can be provided with a below-deck discharge.
TYPICAL INSTALLATIONS: • Office Buildings • Hospitals • Airports • Manufacturing Facilities • Power Stations • Pharmaceutical Facilities TYPICAL APPLICATIONS:
• Sprinkler Systems • Hydrant Systems • Deluge Systems • Monitor Systems • Water Curtain
FIRE - VERTICAL TURBINE
SyncroFlo, Inc.
2905 Pacific Drive Norcross, GA 30071 Tel: (770) 447-4443 www.syncroflo.com
FIRE PROTECTION - VERTICAL TURBINE
Uses standard hollow shaft motors with standard bearing sizes and does not need expensive special motors
All Cast Iron discharge head offers excellent load carrying characteristic and vibration dampening capabilities
Split head shaft design reduces overall overhead vertical space required at site
Quick disconnect threaded coupling standard on smaller shaft sizes and split muff coupling standard with large shafts
Packed stuffing box with split gland allows easy maintenance and repacking
Optional flanged columns, which allows quicker assembly and disassembly of pumps and results in more accurate assembly
Discharge head is cast and hydraulically designed to offer minimum frictional loss
Product lubricated bearings housed in all cast bearing retainers
Hydraulics are designed to meet NFPA20, UL:448, FM:1312 with proven mechanical design of SyncroFlo Turbostream range, which has been in service worldwide for around 40 years
Stainless steel shaft offers excellent corrosion resistance and better torsional dampening
SAll cast bowls construction with zero radial thrust
Impellers are individually secured with collets
Sand collar at the bottom prevents accumulation of dirt and sand in bell mouth bearing
All bronze impellers provided with serrated casing wear rings to improve volumetric efficiency of pump
CONFIGURATION Vertical lineshaft, vertical electro submersible, vertical electric motor or engine driven, dry or wet well
FEATURES • Space saving
• Diffuser bowls ensure balanced axial loading • Soft packing or mechanical seals • API construction • Approved to FM and UL standards, all of which are compliant to NFPA 20 • Nuclear certification • Dry and wet well installations
• Low maintenance costs • High hydraulic efficiency
• Priming problems eliminated since pump ends are submerged in liquid • 60 models, with bowls, heads and columns optimised for performance and cost • Wide choice of materials
DISCHARGE & PERFORMANCE  • 4 in. to 87 in. • Outputs up to 176,115gpm • Heads up to 656 ft.
FIRE - VERTICAL TURBINE
Page 1 Page 2Made with FlippingBook - Online catalogs