This is an interactive catalogue showcasing all our printing solutions offered to you. Click the links and videos within the catalogue for more information.
Email: techsupport@jgelectronics.com
Tel: 011 789 6033
Web: www.jgelectronics.com How to Youtube Chanel Videos: (5) JG Electronics - YouTube _______________________________________________________________________________________
Instructions for: Ceramic Plates
1. Set your press on 190°C and 240 Sec (4min)
2. Print your artwork in a mirror image on Sublimation Paper with a Sublimation printer.
3. Position the plate on top of the rubber of your press and adjust the pressure to medium. (Optional: In winter conditions, you can preheat the plate in your home oven for approximately 2 minutes to prevent it from breaking due to sudden heat)
4. Cut out your artwork and secure it to the center of the plate with heat tape. Make sure the print faces the plate.
5. When the press reaches 190°C, then press for 4 minutes.
6. After 4 minutes, open the press and immediately remove the print (Please use heat gloves). Put the plate into lukewarm water for the cooling down process to start and this will also prevent the print from bleeding.
Page 1 Page 2Made with FlippingBook - professional solution for displaying marketing and sales documents online