Supplemental Use Standards 3.2 Supplemental Use Standards – Residential
3
Regulations for Manufactured Homes, including, but not limited to, all footings, supporting piers, anchors, and tie downs. 3. The tongue, moving hitch, wheels, axles, and transporting lights are all removed. 4. Stairs, porches, entrance platforms, ramps, and other means of entrance and exit to and from the home are installed in accordance with the requirements of the North Carolina State Building Code, attached firmly to the primary structure, and anchored securely to the ground. 5. Other than those within the manufactured home or office itself, all installations of plumbing and electrical wiring and all gas and oil appliances shall comply with the provisions of the building, plumbing, electrical, heating, and gas regulations of the North Carolina State Building Code. 6. Empty liquefied petroleum gas containers and other objects and materials not approved by the Wake Forest Fire Department shall not be stored under manufactured homes or offices.
B.
Class A Manufactured Home : 1.
A continuous permanent masonry foundation, unpierced except for required ventilation and access, shall be installed around the entire perimeter of the home or office. If the masonry foundation is not brick, stone, or decorative concrete block it shall be parged (coated with a mortar-like finish) on the visible side. Class A Manufactured Homes have additional requirements, as described in Section 5.9 and the definition section of this ordinance. 2. Class A Manufactured Housing in GR5 and GR10 Districts shall be permitted if so designated on the Preliminary Plat. 3. Special Use Permit : In the UR District, a Special Use Permit is required for this use and shall meet the criteria and follow the processes outlined in Chapter 15. C. Class B or Class C Manufactured Home: 1. Each manufactured home or office shall be installed with skirting provided by the manufacturer specifically for such use, unpierced except for required ventilation and access, around the entire perimeter of the home or office. Skirting shall be made of a material compatible with the siding of the home or office. 2. Class B and Class C Manufactured Housing shall be permitted in Manufactured Home Parks only. 3. Special Use Permit: In the RD, GR5 and GR10 Districts, a Special Use Permit is required for this use and shall meet the criteria and follow the processes outlined in Chapter 15. No manufactured home park shall be approved for a site less than 10 contiguous acres under single ownership or control. 2. The manufactured home park shall be screened from all adjacent property with a Type C buffer in accordance with Section 8.5.3. 3. The operator/manager of a manufactured home park shall designate and enforce a uniform type of underpinning of all manufactured homes in the community. 4. All streets within a manufactured home park shall comply with the standards set forth in Chapter 6. 5. An acceptable plan for the collection and disposal of garbage shall be included in the site plan for the manufactured home park. 6. Recreational space shall be provided in accordance with Chapter 7. 3.2.7. Manufactured Home Park (RD) A. General Park Requirements 1.
Town of Wake Forest Unified Development Ordinance – July 19, 2022
3-3
Made with FlippingBook - professional solution for displaying marketing and sales documents online