Installation
STEP 3 Adjust the levelling legs
1. Gently slide the washer into position. Excessive force may damage the levelling legs. 2. Level the washer by manually adjusting the levelling legs. 3. When levelling is complete, tighten the nuts using the wrench. NOTE An adjustable wrench or 17 mm open- end wrench is required to loosen or tighten the leveling legs. To protect a soft floor or surface, use the provided rubber cups. You don’t need to use the rubber cups on a hard floor or on a pedestal. 1. Let two or more persons hold both sides of the washer. 2. While slanting the washer to one side, put the rubber cups under each leg of the washer one by one. CAUTION Make sure you have two or more persons insert the rubber cups. Otherwise, the washer may fall, causing physical or property damage.
STEP 4 Put the rubber cups on the legs (Only for soft floor or surface)
English 26
FlexWash_WV9900M_DC68-03768A-07_EN.indd 26
2019-05-23 PM 2:55:18
Made with FlippingBook - Online magazine maker