Operations Your dual loading washer features upper and the lower washers for your convenience. The upper washer is an automatic tub loader that is designed to wash relatively small loads while the lower washer is a drum loader that takes care of normal or relatively heavy loads. The main panel is divided into 2 independent control panels. WARNING To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this washer.
Upper washer
Control panel
05 06 07 08
01
02
03 04
Press to select a cycle.
01 Cycle bar
Press to turn the upper washer on or off.
02 POWER
Press and hold to start operation or press to stop operation temporarily. The status bar shows current cycle information and estimated time remaining, or an information code if the upper washer needs to be checked. Press to toggle between two different water temperature options. • Warm : Colorfast items. • Cold : Brightly colored, very lightly soiled items. Use to add an additional rinse at the end of the cycle to remove laundry additives more thoroughly. Use to clean dirt and bacteria from the tub. Regular use (after every 20 washes) is recommended. Make sure the tub is empty. After connecting the upper washer to your home network using the SmartThings app, you can control the washer remotely. When started, the Smart Control indicator blinks and the top door locks. The washer enters waiting mode and waits for remote commands. For more information, visit the SmartThings app page.
03 START/PAUSE (Hold to Start)
04 Status bar
05 Temp.
06 Extra Rinse
07 Self Clean
08 Smart Control
English 43
FlexWash_WV9900M_DC68-03768A-07_EN.indd 43
2019-05-23 PM 2:55:23
Made with FlippingBook - Online magazine maker