With the Steam option selected, the washer senses the weight of the load and controls the steam effect according to the load size. This improves washing performance. Cycles available with the Steam option are: NORMAL, HEAVY DUTY, BEDDING, WHITES, and SANITIZE. 1. Select a cycle. For applicable cycles, see above. 2. Press Steam . 3. Add detergent and fabric softener as instructed. 4. Press and hold START/PAUSE to start the cycle. NOTE Steam may not be visible or present during the cycle, which is normal. Press this button if you need to shorten the washing time, applicable for NORMAL, HEAVY DUTY, or BEDDING. The shortened time may differ depending on the selected cycle/load/options. You can set the washer to finish your wash automatically at a later time by choosing a delay of between 1 to 24 hours (in 1 hour increments). The hour displayed indicates the time the wash will finish. 1. Select a cycle. Then, change the cycle settings if necessary. 2. Press Delay End repeatedly until a desired end time is set. 3. Press and hold START/PAUSE . The lamp indicator next to the Delay End button turns on with the clock running. 4. To cancel Delay End, restart the washer by pressing POWER . Real-life case You want to finish a two-hour cycle 3 hours from now. To do this, you add the Delay End option to the current cycle with a 3-hour setting, and then press and hold START/PAUSE at 2:00 p.m. The washer starts operating at 3:00 p.m. and ends at 5:00 p.m. Provided below is the time line for this example.
10 Steam
11 Super Speed
12 Delay End
2:00 pm Set the Delay End to 3 hours
3:00 pm Start
5:00 pm End
Cleans the drum by removing dirt and mold from the drum. • Perform once every 40 washes. • Make sure the drum is empty.
13 Self Clean+
English 47
FlexWash_WV9900M_DC68-03768A-07_EN.indd 47
2019-05-23 PM 2:55:24
Made with FlippingBook - Online magazine maker