Lower washer
Self Clean+ Certain usage and environmental conditions may result in some residue build-up or odor in the washer drum. To prevent this build-up of residue or odor causing bacteria and keep your washer drum fresh and clean, perform the Self Clean+ cycle at least once a month or every 40 cycles. Perform the recommended procedure below when using the Self Clean+ cycle. 1. Remove all items from the washer drum and ensure the drum is empty. Laundry left in the drum during the Self Clean+ cycle may be damaged. 2. Press POWER to turn on the washer. 3. Press Self Clean+ . 4. Press and hold START/PAUSE . CAUTION If there is chlorine bleach left in the washer drum for an extended period of time, rust can occur. NOTE • The water temperature for Self Clean+ is defaulted to Hot. This temperature cannot be changed. • In the case where residue is present in the washer drum, add liquid chlorine bleach to the MAX level line in the main-wash compartment before starting the Self Clean+ cycle. Do not add the liquid chlorine bleach to the bleach compartment (This is only the case for Self Clean+ cycle). Do not exceed the max line. Do not use or mix any other detergent or chemicals during the Self Clean+ cycle. If necessary, run a RINSE+SPIN Cycle after the Self Clean+ cycle has completed to help remove any remaining residue. Self Clean+ reminder ( ) • After 40 washing cycles, the Self Clean+ LED reminder icon and the Self Clean+ cycle LED will blink on the control panel for an hour and then turn off automatically. • The reminder will appear on the control panel for 5 additional consecutive cycles before turning off. The next reminder will not appear until another 40 cycles have been completed.
English 61
FlexWash_WV9900M_DC68-03768A-07_EN.indd 61
2019-05-23 PM 2:55:26
Made with FlippingBook - Online magazine maker