Fabric softener/bleach compartment Both the fabric softener compartment and the bleach compartment on the lower washer are not removable by design to facilitate visual feedback to users. To clean the softener compartment, follow these instructions. Cleaning the bleach compartment is basically the same. 1. Open the top-front cover, and then remove the softener cap.
2. Use a soft brush (for example, a toothbrush) to clean inside the compartment and remove impurities. 3. Run the RINSE+SPIN cycle to rinse the compartment. After supplying water and draining 5 times, the 19-minute cycle completes with the final spin process. 1. Open the door and empty the drum. 2. Turn out the diaphragm (sealing or gasket of the drum (A) ), and check if it is stained. If so, follow the steps below. 3. Combine 3/4 cups of liquid chlorine bleach and 1 gallon of warm tap water. 4. Wearing rubber gloves, use a soft, clean cloth dipped in the water and chlorine solution to clean the diaphragm. 5. Let stand for 5 minutes, and then wipe up and dry well.
Door diaphragm
A
CAUTION Use bleach carefully and be sure to follow the bleach manufacturer’s use and care instructions. NOTE Dust may accumulate on the door diaphragm during washing and drying (especially for drying). Therefore, clean the diaphragm after each washing and drying cycles.
English  63
FlexWash_WV9900M_DC68-03768A-07_EN.indd 63
2019-05-23 PM 2:55:27
Made with FlippingBook - Online magazine maker