CENTCO4 4-jaw chuck
Centrifugal force compensation for highest speeds
In the beginning the jaw pairs Z1 and Z2 only apply a centering- force that is necessary to center the workpiece. Only if both jaw pairs Z1 and Z2 are in contact with the workpiece, the clamping force necessary for machining is applied.
Z1
Z2
Z2
Speed (min -1 )
Z1
2+2 self centering + compensating clamping of round, thin-walled,
Actuation by central Piston via standard cylinder
square / rectangular workpieces
iregular shaped and
2+2 self centering and compensating clamping
Examples for workpieces
POSSIBLE COST SAVINGS calculation example 3-jaw chuck normal jaw chuck €/set
Centco4
€/set
1x Special jaws
1.500,-€ 1x Standard jaws
500,-€
1x Standard jaws
375,-€ 1x Standard jaws
500,-€
1x Special jaws
1.750,-€ 1x Standard jaws
500,-€
1x Special jaws
2.000,-€ 1x Standard jaws
500,-€
Total at 1 set of jaws respectively
Total at 1 set of jaws respectively
Serration optional Inch or metric
5.625,-€
2000,-€
Cost savings at 1 set of jaws
Cost savings at 1 set of jaws
0 €
3.625,-€
128 SMW-AUTOBLOK
Made with FlippingBook Publishing Software