AP-RC AP-RD
Quick jaw change high precision power chuck Ø 170 - 400 mm ■ Closed center ■ 3 jaws ■ proofline ® chucks = fully sealed – low maintenance Application/customer benefits • For mid to large batch flexible production • Quick jaw change = short set up time • Fully sealed, ideal for dry machining of castings and forgings or if high pressure coolant is used • Ideal for vertical, pick up and horizontal machines AP-RC: Quick jaw change with TONGUE & GROOVE master jaws AP-RD: Quick jaw change with SERRATED master jaws (2.5 mm x 60°) (radially adjustable) Technical features
Quick jaw change TONGUE & GROOVE
Quick jaw change SERRATION
• High accuracy patented quick jaw change • Constant gripping force with permanent grease lubrication • Central bore for coolant and / or air
• Chuck body and internal parts case hardened • proofline® chucks = fully sealed – low maintenance
Standard equipment 3-jaw chuck 1 set soft top jaws 1 quick jaw change T wrench Mounting bolts
Ordering example 3-jaw chuck AP-RC 215 / A6 or 3-jaw chuck AP-RD 260 / Z220
s
a l e
m a i
Actual gripping force diagrams
120 100 160 140 200 180 210
115
100
80
60
215
80 60 40 20
40
400
315
F G
F G
170
260
F
F
20
0
1000
2000
3000
4000
0
1000 2000 3000 4000 5000 6000
Speed (r.p.m.)
Speed (r.p.m.)
Safety advice / danger of damage: When using taller / heavier jaws and / or clamping on a bigger diameter reduce draw pull / rotating speed accordingly.
The data in the diagrams refer to 3-jaw chucks, newly maintained according to their service manuals using SMW-AUTOBLOK K67 grease.The static and dynamic gripping forces have been measured using standard soft top jaws, placed in a position not exceeding the outer diameter of the chuck.
Technical data
SMW-AUTOBLOK Type
AP-RC 170 AP-RD 170
AP-RC 215 AP-RD 215
AP-RC 260 AP-RD 260
AP-RC 315 AP-RD 315
AP-RC 400 AP-RD 400
Number of jaws Radial jaw stroke Axial piston stroke Max. draw-pull* Max. gripping force*
3
3
3 5
3
3 7
mm mm
3.6
4.6
6.3
17 30 72
22 42
24 55
30 65
33 75
kN kN
112
150
180
210
Max. speed
5400
4600 19.5 0.113
4000 32.5 0.28
3200
2400
r.p.m.
Weight (without top jaws)
10
56
90
kg
Moment of inertia
0.037
0.69
1.7
kg·m 2
Recommended actuating cylinders
SIN-S 100
SIN-S 100 / 125 SIN-S 125 / 150 SIN-S 125 / 150 SIN-S 150 / 175
Id.-No. AP-RC (Center mounting) Id.-No. AP-RD (Center mounting)
77186217 77181417
77186221 77181421
77186226 77181426
77186231 77181431
77186240 77181440
* For internal clamping reduce the draw pull by 30%.
SMW-AUTOBLOK 476
SMW-AUTOBLOK 178
SMW-AUTOBLOK 335
174 SMW-AUTOBLOK
Made with FlippingBook Publishing Software