TSBF-CP TSBR-CP Compensating Floating jaws Compensating Rigid jaws
Compensating pull-down chuck Ø 220 - 330 mm
■ Active pull-down ■ Tongue & groove ■ Large through-hole ■ 3 jaws
Application/customer benefits • Clamping of shafts or chuck parts where the reference is not the O.D. but a center or a centering diameter • A center point or a centering insert will center the workpieces and the jaws will clamp compensating and actively pull the workpiece down to the datum • Through-hole to insert long workpieces or for special clamping applications TSBF-CP: Compensating clamping with active pull down and floating base jaws TSBR-CP: Compensating clamping with active pull down and rigid base jaws Technical features • Active pull-down • TONGUE & GROOVE base jaws • Compensating clamping • Permanent grease lubrication • Centrifugal force compensation • proofline ® chucks = • Large through-hole fully sealed - low maintenance Standard equipment Ordering example 3-jaw chuck 3-jaw chuck TSBF-CP 220 / A6 Mounting bolts or 3-jaw chuck TSBR-CP 330 / Z300
s
a l e
m a i
TSBF-CP/TSBR-CP
TSBF-CP/TSBR-CP
A
A
■ The workpiece is actively pulled down to the center point. The tailstock just supplies the necessary force to support the workpiece. The result is an exact cylindrical and straight workpiece.
Principle of function: ■ 1 compensating pre-clamping - 2 active pull-down - 3 clamping
TSBF-CP
TSBR-CP
Non active pull down compensating chuck
■ The workpiece is lifted by the jaws from the center point. When a higher tailstock force is applied for compensation, the workpiece will be bent. Technical data
Floating jaws
Rigid jaws
TSBF-CP 220 TSBR-CP 220
TSBF-CP 260 TSBR-CP 260
TSBF-CP 330 TSBR-CP 330
SMW-AUTOBLOK Type Angular jaw stroke U° Radial jaw stroke at distance h Pull down movement (standard)
deg. mm mm mm mm
5.2°
5.2°
5°
5.3 0.1
6.3 0.1
7
0.1
Axial piston stroke
21
25
25
Compensation (on the dia.) at distance h
±1.5
±1.5
±2.5
Max. draw pull**
kN kN
15 37
25 60
40 96
Max. gripping force at distance h**
Max. speed*
r.p.m.
4250
3750
3000
Weight (plain back without top jaws)
kg
25
40
67
Moment of inertia
kg·m 2 Type
0.165
0.34
0.97
Recommended actuating cylinders
SIN-S 85
SIN-S 100
SIN-S 125
Id.No. TSBF-CP (center mounting) Id.No. TSBR-CP (center mounting)
77198322 77198522
77198326 77198526
77198333 77198533
* The above maximum speed is allowed with standard weight / height top jaws and applying the full draw pull only. For more information please contact SMW-AUTOBLOK. **For internal clamping reduce the draw pull by 30%.
SMW-AUTOBLOK 482
SMW-AUTOBLOK 476
SMW-AUTOBLOK 335
202 SMW-AUTOBLOK
Made with FlippingBook Publishing Software