TPT-C
High precision 2+2 jaw power chuck with self-centering independent jaw movement Ø 500 - 800 mm
■ Closed center ■ Tongue & groove
2+2 independent jaw movement TONGUE & GROOVE
Application/customer benefits • Clamping of rectangular and square workpieces, self-centering in two axes Technical features • 2+2 jaw chuck with 2 independent self-centering jaw drives (two wedge drives) • Jaw No. 1 + 3 (clamping jaws): power operated • Jaw No. 2 + 4 (centering jaws): spring operated or optionally power operated* • High quality cast iron body for lightweight and durability • Protection from contamination with seals along the master jaw profiles Standard equipment* Ordering example 2+2 jaw chuck Power chuck TPT-C 500 2+2 Z380 1 set of T-nuts and bolts or 1 set of soft top jaws Power chuck TPT-C 800 2+2 A15 Mounting bolts
A One wedge drive Operated by standard closed center cylinders. Jaws 2 and 4 are spring operated to center the component in one axis. Jaws 1 and 3 are power operated by the cylinder to center the component on the second axis and to apply the gripping force to drive the component. For external clamping only (on request internal clamping). See specific draw pull, gripping force and maximum speed in the technical data table below.
B Two independent wedge drives* Operated by independent double piston cylinders. Jaws 2 and 4 are power operated (using the small cylinder) to center the component in one axis. Jaws 1 and 3 are also power operated (using the large cylinder) to center the component on the second axis and to apply the gripping force to drive the component. Since both pair of jaws are power operated the chuck can reach higher speeds. See specific draw pull, gripping force and maximum speed in the technical data table below.
*Note:
The chucks are always delivered as „one wedge drive“ version: To use them as „two independent wedge drives“ version, just remove the internal „spring assembly“ according to instruction manual.
Technical data
TPT-C 500 2+2
TPT-C 630 2+2
TPT-C 800 2+2
SMW-AUTOBLOK Type Number of jaws Radial jaw stroke
8.5
10 38
10 38
mm mm
32
Wedge stroke
180
325
550
Weight (plain back without top jaws)
kg
6
16
44
Moment of inertia
kg·m 2
77995007
77996307
77998007
Id. No. TPT-C (center mounting)
A ONE wedge drive
SMW-AUTOBLOK Type Number of jaws Max. draw pull** (clamping wedge, jaw 1 + 3) Max. gripping force jaw 1 + 3 (power operated) Max. centering force jaw 2 + 4 (spring operated)
TPT-C 500 2+2
TPT-C 630 2+2
TPT-C 800 2+2
kN kN kN
80
80
80
160
160
160
30
30
30
Max. speed
r.p.m. Type
800
630
500
Recommended actuating cylinders
SIN-S 175-200
SIN-S 175-200
SIN-S 175-200
B TWO independent wedge drives
SMW-AUTOBLOK Type Number of jaws Max. draw pull** (clamping wedge, jaw 1 + 3) Max. draw pull** (centering wedge, jaw 2 + 4) Max. gripping force jaw 1 + 3 (power operated) Max. centering force jaw 2 + 4 (power operated)
TPT-C 500 2+2
TPT-C 630 2+2
TPT-C 800 2+2
kN kN kN kN
67 50
67 50
67 50
160 120
160 120 850
160 120 700
Max. speed
r.p.m. Type
1200
Recommended actuating cylinders***
DCE 140 / 140
DCE 140 / 140
DCE 140 / 140
** For internal clamping reduce the draw pull by 30%.
*** SMW-AUTOBLOK 348:
Technical details of DCE cylinders see general catalog.
SMW-AUTOBLOK 482
SMW-AUTOBLOK 476
SMW-AUTOBLOK 335
212 SMW-AUTOBLOK
Made with FlippingBook Publishing Software