W
Shaft chuck Ø 215 - 460 mm
Shaft chuck with retractable jaw carrier Face driver
■ Ordering review
Supply range:
Compensating clamping (Type C) chuck with mounting bolts and mounting keys, oil*
Type C
Spindle mounting
W-215
W-260
W-325
W-460
A6 A8
069930 069932
069527 069444 069815
069525 068981
SMW AUTOBLOK Oil: C GLP ISO VG 68
A11 A15
069602 069600
Supply range:
Self centering clamping (Type S) chuck with mounting bolts and mounting keys, oil*
Type S
Spindle mounting
W-215
W-260
W-325
W-460
A6 A8
069934 069936
069542 069546 069817
069552 069554
SMW AUTOBLOK Oil: C GLP ISO VG 68
A11 A15
069606 069604
4
* Attention: The W-chucks in this ordering review are for the use of power operated face drivers only (Type 1).
To use face drivers with spring loaded center, a different chuck (Type 2) has to be used. Please ask our engineers for the corresponding Id. No. and the matching cylinders. Power operated face drivers and face drivers with spring loaded center cannot be used alternating on the same chuck.
Attention: Shaft chuck for vertical machines on request
Actuating cylinder
Type
Double piston cylinder
W-215
W-260
W-325
W-460
ZHVD-SZ
68-17
110-25 045297
110-25 / 240-40 045297 / 045298 170-40 / 95-50 33705215
240-40 045298
Id. No.
044429
DCN
Id. No.
Oil
Oil for permanent oil bath lubrication
Oil specification Contents
CGLP ISO VG 68
1 liter/1.05 quart (U.S.)
Id. No.
197859
SMW-AUTOBLOK 335
SMW-AUTOBLOK 245
Made with FlippingBook Publishing Software