CSC
s
a l e
a
i
Crank shaft chuck with retractable jaws
Pull down of the workpiece to the centerpoint by pivoting movement of the jaws
Clamping compensating or self-centering
CSC with center for the axial positioning of the workpiece
Axially movable and lockable center point for centering and for Z = 0 position
1
Step 1, loading of the workpiece: • The centers are retracted • The jaws are retracted and open
2
Step 2, create the Z = 0 position: • The left center point moves forward to its end stop to create the Z = 0 position and is locked • The jaws are retracted and open
3
Step 3, centering the workpiece: • the right center moves forward to center the workpiece between the 2 centers and is locked
4
Step 4, clamping the workpiece: • The jaws move forward and clamp the work piece with a pull down effect • The jaw carrier is locked
246 SMW-AUTOBLOK
Made with FlippingBook Publishing Software