Diaphragm clamping technology with quick jaw change at its best - for hard turning, grinding, high precision turning
D-160 – 400
s
a l e
m a i
Operation of diaphragm system
The ultimate, easy principle: The operation is based on elastic deformation of the diaphragm - this means - no sliding parts - no friction - centrifugal force compensation - proofline ® series = fully sealed - low maintenance
Jaws are factory finished and match any chuck with no loss of concentricity.
No need to grind or bore jaws on the chuck anymore! TIR < 0.020 mm
Setup time < 4 minutes for jaws and locators TIR < 0.020 mm without boring / grinding
Ideal for PICK-UP machines Radial access for quick change mechanism
Media feed Air sensing + air blow / coolant
Full interchangeability of the jaws
C
D
A
B
• No boring • No grinding • Less jaw sets needed • TIR < 0.020 mm
Any jaw set can be put on to any chuck without loss of concentricity
No need to grind or bore jaws on the chuck anymore!
266 SMW-AUTOBLOK
Made with FlippingBook Publishing Software