D-VARIO
Diaphragm chuck FLEXIBLE MODULAR SYSTEM
■ Overview clamping kit
Configuration of the set up for pitch line clamping within only 5 steps:
I
II
III
IV
V
At first you need to choose your matching top jaw (size 1 - 6) for the outside diameter [da] of the gear to be machined. Each size of top jaw can cover 20 mm outside diameter using two different types of clamping pins (Type A and B). One set of top jaw consists of 3 pieces including 1 straight key lock insert.
The determination of the spherical clamping pins is made according to the ball dimension of the gear. There are 2 types of clamping pins: Type A for the first 10 mm of the clamping range of the top jaws. Type B for the second 10 mm of the clamping range of the top jaws.
Optionally prelocator pins are available. Prelocator pins are used at automatic loading. The determination is made according to the clamping pins used.
One set of Key Lock insert consists of 2 keys. Gears, which number of teeth that is divisible by 3 can be machined with 3 of the same type Key Lock insert (straight). For all gears, which number of teeth is not divisible by 3, there are different key insert sets available according to the number of teeth. The Key Lock inserts are the same for all 6 sizes of top jaws.
The following types of locator bases are available: Type A: Without air sensing / without nozzle for coolant Type B: Without air sensing / with nozzle for coolant Type C: With air sensing / with nozzle for coolant The height of the locator posts is depending on the gear.
Overview of the clamping kit:
Gear Parameter for the configuration of the clamping kit:
Top jaws (1 set = 3 pcs.) available in 6 sizes for different outside diameters [da]
1 pcs. key insert straight contained in the set of the top jaws Clamping pin
Outside diameter [d a ]
(1 set = 3 pcs.) Ball diameter 3 - 6 mm for different ball dimensions
1
Gear
Gear
Key lock inserts (1 set = 2 pcs.) for different number of teeth [z]
Number of teeth [z]
Ball dimension
D-Vario Configurator
free application to configurate your set up
www.smw-autoblok.com
278 SMW-AUTOBLOK
Made with FlippingBook Publishing Software