EMX-C
Segment sleeve mandrel Ø 25 - 121 mm
■ Size 1 - 5 ■ Large expansibility
Segment sleeve mandrel Power operated
Application/customer benefits • Ideal for volume production and hard turning / grinding with wear resistant, case hardened and vulcanised clamping sleeves • Highest accuracy and high torque transmission by means of fixed mandrel body • Axial pull down by the axial clamping movement of the clamping sleeve = best face run out • Clamping sleeve quick change for short setup times • Preparation for air sensing Technical details • Large expansibility 1 - 1.2 mm depending on the size (-0.3 » +0.7 / -0.3 » +0.9 from nom. Ø) • Case hardened and vulcanized segment sleeves • Power operated / manual lubrication • Rigid design with flange mounting Standard equipment Basic mandrel with draw bolt for power operation + actuating screw; Mounting bolts
M
B 3
E 1
E 2
SW
axial stroke
preparation for air sensing
10
K 3
P**
10
Ø3
air sensing
F 1
F 2
34 35
G
18
28
Subject to technical changes. For more detailed information please ask our customer service.
EMX-C-1 9410000
EMX-C-2 9420000
EMX-C-3 9430000
EMX-C-4 9440000
EMX-C-5 9450000
SMW-AUTOBLOK Type Id. No.
A1 A2 B1 B2 B3
115
115
115 115
135 135 112
165 165 140
75 92
75 92
92
3 x M10
3 x M10
3 x M10
3 x M10
3 x M12
12.5
12.5
15.6
15.6
16
C D
62
62
75
95
120
3 x 120° Ø 3 Clamping range
25 - 37
35 - 53
49 - 70
66 - 95
90-120
E1 E2 F1 F2
37 30 25 94
43 35 25
55 45 25
64 50 25
86 70 32
Clamping length
105 130
131.5 156.5
150.7 175.7
185.5 217.5
G H
119
M8 x 1
M12 x 1.5
M14 x 1.5
M16 x 1.5
M20 x 1.5
J1 J2 J3
62
62
100 M6
115 M8
140 M8
M6
M6
3 x 120° H7
6
6
6
8
8
K1 K2 K3
35
42
54
73
96
f8 f8
24.5 16.2
34.5 15.2
48.5 16.5
64.5
89.5
17
22
transport
M
3 x 120°
-
-
-
M8
M8
P**
12.5 WS5
13.5 WS6
15.5
19.5
21.5
WS (hex)
WS10
WS12
WS14
Technical data SMW-AUTOBLOK Type Id. No. Axial stroke Expansibility in dia. Max. actuating force in kN Max. transmittable torque in Nm Weight in kg Rec. clamping cylinders
EMX-C-1 9410000
EMX-C-2 9420000
EMX-C-3 9430000
EMX-C-4 9440000
EMX-C-5 9450000
6.0 1.0
6.0 1.0
6.0 1.2
6.0 1.2
6.0 1.2
8
12 74
15
25
30
36
120
281
467 13.3
2.9
3.2
4.3
6.6
SIN-S 70
SIN-S 85
SIN-S 85
SIN-S 100
SIN-S 125
All measurements in unclamped position = Right end position.
** Clamping on area P only is not allowed.
312 SMW-AUTOBLOK
Made with FlippingBook Publishing Software