USP 4.0 250 Ultrasonic linear stroke control
10
20
mA
V
8
16
6
12
4
8
2
4
0
0
mm
Current or voltage signal depending on the steady rest clamping range
10
20
mA
V
8
16
6
12
4
8
2
4
0
0
mm
The linear stroke control sensor generates an analog current or voltage signal between a minimum of 4 mA and a maximum of 20 mA (0-10 V) depending on the steady rest clamping range. This allows to detect any position of the steady rest and thus of the steady rest arms safely.
• Time and energy saving due to only partial opening of the steady rest during the workpiece loading (with appropriate machine hydraulics).
• Collision protection through evaluation of the output signal signal by the machine control.
Valve body for steady rests with USP 4.0 250
Cable 200 mm with plug M12x1 and protection hose
Valve body with Air purge and coolant drain valve. Use of airpurge is mandatory!
Valve body with integrated drain valve
426 SMW-AUTOBLOK
Made with FlippingBook Publishing Software