SCU
Linear stroke control unit for Steady Rests
■ Completely sealed, protection class IP 66 ■ Output signal 4-20 mA or 0-10 V Application/customer benefits • For SMW-AUTOBLOK Steady Rests • Linear monitoring of the complete clamping stroke avoids collision with the tools, which is an added safety feature • Time saving by only partial opening the Steady Rest (with corresponding hydraulic power unit) Technical features • Protection class IP 66 • Output signal 4 - 20 mA or 0 - 10 V • Electrical power supply 24 VDC • proofline ® = fully sealed – low maintenance Accessories Sensor connection cable (Plug M12 x 1 4-pin)
s
a l e
m a i
Installation and Position
Technical data for other Steady Rest types SCU, output 4 - 20 mA: Id. No. 225440 SCU, output 0 - 10 V: Id. No. 226122
Technical data for Steady Rests type RX SCU, output 4 - 20 mA: Id. No. 224244 SCU, output 0 - 10 V: Id. No. 225924
M5
M4
25
48
max. 340
18
9
17,5
56
max. 340
5
46
M12x1 **
Note for both SCU types: It is about a two-wire system. The measuring current is simultaneously acting to feed the transformer. Subject to technical changes. For more detailed information please ask our customer service. * For mounting Steady Rests type KLU: Ø 8 mm. ** Connector 4-pin.
Length
Id. No.
Cables for SCU
5 m 10 m 15 m
0E011315 0E011316 0E011317
Sensor connection cable straight plug M12 x 1 4-pin
436 SMW-AUTOBLOK
Made with FlippingBook Publishing Software