TMS-2G
Quick change workholding system ■ Highest repeatability and change-over accuracy ■ Central actuation for locking and unlocking ■ Large through-hole
QUICK CHANGE WORKHOLDING SYSTEM
Application / customers benefits • Very simple system for quick change chucks less than 1 mn • Quick change over of workholding on CNC machines • Less down time and high changing accuracy • Available for any ASA spindle turning machine • Available for any clamping device (automatic or manual clamping) • Easy to load and unload (no rotation needed) • Delivered with lifting ring and manual key safety lock Technical features
• Highest repeatability and change-over accuracy • Central actuation for locking and unlocking • Large through-hole • Protected against contamination
Function
Only one base TMS-2G spindle flange is mounted on your spindle nose
TMS-2G Flange mounted on the chuck
Base spindle flange TMS-2G
Machine spindle nose
Taper face
Quick screws
link to the movie
Sliding jaws
Subject to technical changes. For more detailed information please ask our customer service.
Several TMS-2G flanges (one for each chuck) could be used. The chuck is mounted on its TMS-2G Flange out of the machine.
Procedure for the quick change: • Connexion between Spindle flange and chuck flange by a taper-face and a set of quick screws (repeatability < 7 µ) • Actuation for clamping is made by an internal patented sliding jaws system with large through-hole
12
SMW-AUTOBLOK 465
Made with FlippingBook Publishing Software