AN-D AN-M
High precision power chuck Ø 125 - 400 mm
Application/customer benefits • For chucking parts • Suitable for vertical machines ■ Closed center ■ 2 and 3 jaws (4 jaws only Ø 400 mm)
INCH SERRATION
METRIC SERRATION
AN-D: Master jaws with INCH SERRATION (1/16” x 90°, 3/32“ x 90°) AN-M: Master jaws with METRIC SERRATION (1.5 mm x 60°) (suitable for japanese chuck top jaws) Technical features • Gripping force transmission via wedge hook • Sealed against swarfs and chips • Case hardened body to assure greatest precision and long chuck life Standard equipment Ordering example 2-, 3- or 4-jaw chuck 3-jaw chuck AN-D 210 / A6 1 set T-nuts with bolts or 1 set soft top jaws 2-jaw chuck AN-M 250 / Z220 Mounting bolts
Actual gripping force diagrams
120 100 140 160 180 200 210
120
100
80
60
210
400
315
80 60 40 20
165
F G
250
40
F G
F
125
F
20
0
1000
2000
3000
4000
5000
6000
7000
0
1000
2000
3000
4000
Speed (r.p.m.)
Speed (r.p.m.)
Safety advice / danger of damage: When using taller / heavier jaws and / or clamping on a bigger diameter reduce draw pull / rotating speed accordingly.
The data in the diagrams refer to 3-jaw chucks, newly maintained according to their service manuals using SMW-AUTOBLOK K67 grease. The static and dynamic gripping forces have been measured using standard soft top jaws, placed in a position not exceeding the outer diameter of the chuck.
Technical data SMW-AUTOBLOK Type
AN-D 125 AN-M 125 AN-D 400 AN-M 400 2323232323234 3.2 3.6 4.4 5 6.3 7 15 17 21 24 30 33 AN-D 165 AN-M 165 AN-D 210 AN-M 210 AN-D 250 AN-M 250 AN-D 315 AN-M 315 14 20 17 25 25 38 33 50 40 60 50 70 70 40 56 50 72 75 115 100 150 120 180 150 210 210 7000 6000 5000 4000 3200 2400 2000 5.5 9.5 19 32 56 84 0.011 0.032 0.105 0.26 0.69 1.6
Number of jaws Radial jaw stroke Axial piston stroke Max. draw pull* Max. gripping force*
mm mm
kN kN
Max. speed
r.p.m.
Weight (without top jaws)
kg
Moment of inertia
kg·m 2
Recommended actuating cylinders
Type
SIN-S 85 / 100 SIN-S 100 SIN-S 100 / 125 SIN-S 125 / 150 SIN-S 125 / 150 SIN-S 150 / 175
Id-No. AN-D 2 jaws (Center mounting) Id-No. AN-D 3 jaws (4 jaws 77140540) (C. m.) Id-No. AN-M 2 jaws (Center mounting) Id-No. AN-M 3 jaws (4 jaws 77140640) (C. m.) * For internal clamping reduce the draw pull by 30%.
77140140 77140340 77140240 77140440
77140113 77140313 77140213 77140413
77140116 77140316 77141516 77141616
77140121 77140321 77141521 77141621
77140125 77140325 77141525 77141625
77140131 77140331 77140231 77140431
SMW-AUTOBLOK 470
SMW-AUTOBLOK 472
SMW-AUTOBLOK 335
54 SMW-AUTOBLOK
Made with FlippingBook Publishing Software