AP ® -C
High precision power chuck Ø 170 - 400 mm ■ Closed center ■ 3 jaws ■ proofline ® chucks = fully sealed - low maintenance Application/customer benefits • For large batch production • Fully sealed, ideal for dry machining of castings and forgings or if high pressure coolant is used AP-C: TONGUE & GROOVE master jaws (American Standard) Technical features • Constant gripping force with permanent grease lubrication • Central bore for coolant and / or air • Chuck body and internal parts case hardened • proofline® chucks = fully sealed - low maintenance Standard equipment Ordering example 3-jaw chuck 3-jaw chuck AP-C 215 / A6 Mounting bolts
TONGUE & GROOVE
s
a l e
m a i
Actual gripping force diagrams
120 100 160 140 200 180 210
115
100
80
60
400
215
315
80 60 40 20
260
40
170
F G
F G
F
F
20
0
1000
2000
3000
4000
0
1000
2000 3000
4000 5000
6000
Speed (r.p.m.)
Speed (r.p.m.)
Safety advice / danger of damage: When using taller / heavier jaws and / or clamping on a bigger diameter reduce draw pull / rotating speed accordingly.
The data in the diagrams refer to 3-jaw chucks, newly maintained according to their service manuals using SMW-AUTOBLOK K67 grease. The static and dynamic gripping forces have been measured using standard soft top jaws, placed in a position not exceeding the outer diameter of the chuck.
Technical data
SMW-AUTOBLOK Type Number of jaws Radial jaw stroke
AP-C 170
AP-C 215
AP-C 260
AP-C 315
AP-C 400
3
3
3 5
3
3 7
mm mm
3.6
4.6
6.3
Axial piston stroke Max. draw pull* Max. gripping force*
17 30 72
22 42
24 55
30 65
33 75
kN kN
112
150
180
210
Max. speed
r.p.m.
6000
5000 19.5 0.113
4000 32.5 0.28
3200
2400
Weight (without top jaws)
kg
10
56
90
Moment of inertia
kg·m 2
0.037
0.69
1.7
Recommended actuating cylinders
Type
SIN-S 100
SIN-S 100 / 125 SIN-S 125 / 150 SIN-S 125 / 150 SIN-S 150 / 175
Id. No. AP-C (Center mounting)
77186817
77186821
77186826
77186831
77186840
* For internal clamping reduce the draw pull by 30%.
on request: Tooling Standard Parts Catalog
SMW-AUTOBLOK 466
SMW-AUTOBLOK 468
SMW-AUTOBLOK 325
62 SMW-AUTOBLOK
Made with FlippingBook Publishing Software