APL-D APL-C
High precision power chuck Ø 500 - 1000 mm ■ Closed center ■ Long stroke ■ 3 jaws ■ proofline ® chucks = fully sealed - low maintenance Application/customer benefits • For large batch production • Fully sealed, ideal for dry machining of castings and forgings or if high pressure coolant is used • Large clamping range APL-D: INCH SERRATION master jaws APL-C: TONGUE & GROOVE master jaws (American Standard) Technical features • EXTRA long jaw stroke • Constant gripping force with permanent grease lubrication • Center bore for coolant and / or air • Chuck body and internal parts case hardened • proofline® chucks = fully sealed - low maintenance Standard equipment Ordering example 3-jaw chuck 3-jaw chuck APL-C 630 Z380
INCH SERRATION
TONGUE & GROOVE
s
a l e
m a i
1 set T-nuts and bolts (no APL-C) 1 set soft top jaws (no APL-C) Mounting bolts
Actual gripping force diagram
The data in the diagrams refer to 3-jaw chucks, newly maintained according to their service manuals using SMW-AUTOBLOK K67 grease. The static and dynamic gripping forces have been measured using standard soft top jaws, placed in a position not exceeding the outer diameter of the chuck.
200 220
180
160
140
120
1000
800
630
500
100
Safety advice / danger of damage: When using taller / heavier jaws and / or clamping on a bigger diameter reduce draw pull/rotating speed accordingly.
80
60
F G
40
F
20
1400
1600
0
200
400
600
800
1000
1200
Speed (r.p.m.)
Technical data
APL-D 500 APL-C 500
APL-D 630 APL-C 630
APL-D 800 APL-C 800
APL-D 1000 APL-C 1000
SMW-AUTOBLOK Type
Radial jaw stroke Axial piston stroke Max. draw pull* Max. gripping force*
mm mm
13.3
13.3
13.3
13.3
33
33
33
33
kN kN
120 215
120 215
120 215 800 535
120 215 750 840 105
Max. speed
r.p.m.
1400
1000 297 14.6
Weight (without top jaws)
kg
170
Moment of inertia
kg·m 2
5.5
44
Recommended actuating cylinders
Type
SIN-S 175 / 200
SIN-S 175 / 200
SIN-S 175 / 200
SIN-S 175 / 200
Id. No. APL-D (Center mounting) Id. No. APL-C (Center mounting)
77184050 77187850
77184063 77187863
77184080 77187880
77184090 77187890
* For internal clamping reduce the draw pull by 30%.
SMW-AUTOBLOK 470
SMW-AUTOBLOK 472
SMW-AUTOBLOK 335
66 SMW-AUTOBLOK
Made with FlippingBook Publishing Software